gbox windows with phoenix reader & card - can you help me get this reading card

bob808

I have a working gbox setup that can connect to remote shares, and I want to get a local card working with this setup.

I have bought a infinity phoenix and have put it into phoenix mode... It is connected on com1 in my pc. I have a uk nds freesat card for testing, but when I start gbox, it sees my remote peers but no local card.

Here is my gbox_cfg - can you please help me figure out what I can change to get this working?

Code:

 # gbox config file
W: { 00 00 } 9600
G: { 03 }
C: { 01 }
M: { 01}
A: { 02 }
U: { 02 }
H: { 01 }
T: { 00 }
O: { 00 } 192.168.0.5
L: { 00 } 192.168.0.5
Z: { 01 10 } 192.168.0.5 7777
V: { 00 0X } # Internal slots 1&2 + comports
F: { 43 }  /dev/tts/0 // rs232 com1

(21-July-2008 21:21)
i just enabled console output and this is what comes up when I load gbox:

Quote:

Starting Gbox, please wait...
Seasonport=0 speed=9600
OSD (dbox2) IP = 192.168.x.xx

gbox 2.1B/Windows&DOS@X86 ( Dec 2 2005, 02:46:51 )
strange input data in gbox_cfg, demux, pos 3659
mode 03
AU:02/update:02/KeyFile:00 Hash:01 DispECM:01/EMM:01 UDPInit:00 OSD:00
trying to get online, please wait ...

** note - it then confirms my ip, and any of the remote systems I can connect to here - this works ok - **

enx_conf = 3 ; reset on zap=0
Total 1 ports to monitor
monitoring port: 6627
CPU 80X86 compatible
TPSCrypt 1 PTS 1/1
Could not open rs232 port /dev/tts/0 (No such file or directory)
mode: any pid
entering main loop
ReRead pmt.tmp

Anyone know what I can try to fix this?

Thanks

bob

leloup

thank you

Bruty

V: { 00 0F } # all comports (COM1-05 and COM2-0A)
#F: { 43 } /dev/tts/0 // rs232 com1

bob808

thanks - I now have it saying that it sees the reader '/dev/ttys0 opened with 1 multicam(s)' but there is no local card detected...

Any idea what I need to do now?

I have played about with newcs and it sees the card no bother - but unless I really have to I dont want to rely on newcs as I think gbox should read the card natively?

Thanks

bob

Bruty

You can use only 2 ports
I use 2 usb ports at Gbox windows
Very important is last cygwin1.dll

I have at gbox_cfg

F: { A1 } 1 #USB-RS232
V: { 00 0F }

When you have problem with card failed you must config softcam.cfg line T:

bob808

Quote:

Originally Posted by Bruty

You can use only 2 ports
I use 2 usb ports at Gbox windows
Very important is last cygwin1.dll

I have at gbox_cfg

F: { A1 } 1 #USB-RS232
V: { 00 0F }

When you have problem with card failed you must config softcam.cfg line T:

What do you mean you can only use 2 ports?

I am now using a pci com port and not a usb one, am using com2... got it again seeing the 'multicam port' using v: {00 0A} but still no card detected... I also changed the T line in softcam.cfg to 06 from 01, but still not detecting... any other ideas?

Thanks

bob

luna

try to use V: { 00 07 } for com port 2, In C put 02.

regards

Bruty

@Bob808

Very important is last cygwin1.dll

bob808

Quote:

Originally Posted by Bruty

@Bob808

Very important is last cygwin1.dll

Luna - tried those changes and no difference...

Bruty - i take it you mean I need a newer cygwin1.dll? If so where can I get ehe latest cygwin1.dll? I have the version that came with my gbox for windows setup, but nothing else... can you point me to where I can get the newest one?