Go Back   Eurocardsharing > Sharing receivers > Other sharing receivers

Other sharing receivers Discussion, HYPERCAM on SH4 - QBOX HD Setup Instructions at Sharing receivers forum; INTRODUCTION ------------ Here is a brief note on installation process required on QBOX HD from Duolabs. For now, QBOX HD ...

LinkBack Thread Tools Display Modes
HYPERCAM on SH4 - QBOX HD Setup Instructions
Junior Member
single's Avatar
Posts: 11

Level: 2 [♥ Bé-Yêu ♥]
Life: 0 / 28
Magic: 3 / 880
Experience: 12%

Thanks: 3
Thanked 9 Times in 5 Posts
Join Date: Sep 2007
HYPERCAM on SH4 - QBOX HD Setup Instructions - 08-April-2009, 15:14

Here is a brief note on installation process required on QBOX HD
from Duolabs.
For now, QBOX HD is delivered with an ALPHA firmware not fully
functional. Despite the fact that this receiver can 'in theory'
handle 3 tuners, only one can be really used for image delivering.
This is DVB-S2 first tuner.
Hypercam has just been adapted to handle decryption operations on
this ALPHA firmware. In a 'near' futur, drivers could change on the
receiver and results in hypercam no more decrypting or crashing.
You've been warned !
Also please note that this binary has QBOX dedicated embedded settings,
so it won't work on other SH4 based STB such as IPBOX.
Finally, Enigma2 softcam operation logic is "beta" in hypercam, so there
may be imperfect operations.
Now it's up to you to use or not hypercam. Enjoy it !
================================================== ===============
For now, you have to do a MANUAL setup. There are no automatic setup
=> go into /var
=> create bin folder, if it does not exists : mkdir -p bin
=> upload hypercam.qboxhd into /var/bin, either through scp or ftp
=> make binary executable : chmod 755 hypercam.qboxhd
=> upload hypercam.cfg.qboxhd into /var/bin, either through scp or ftp
=> rename hypercam.cfg.qboxhd to hypercam.cfg
=> edit usual settings in hypercam.cfg
=> create a symbolic link : ln -s /dev/dvb/adapter0/ca0 /dev/dvb/adapter1/ca0
Now you can start hypercam : /var/bin/hypercam.qboxhd
You should now see usual hypercam status files created into /tmp. Hypercam should
work immediatly with sharing and softcam operations. If you want to use smartcard
readers, it's a litle bit more complicated !
=> use ps to find a process named l2camd, write down its process ID and its parent process ID
=> use ps to find a process named launcher with the process ID of l2camd parent's process ID
=> killall -9 either l2camd and laucher with previous process ID
=> remove the smartcard driver from the system : rmmod smartcard.ko
=> re-insert the smartcard driver into the system : insmod /lib/modules/.../smartcard.ko
You can now restart hypercam. It should see both smartcard readers and may be able to
manage inserted cards.
PLEASE NOTE : Smartcard drivers is experimental in QBOXHD firmware. Some cards are working,
some are not...and some that are working are not working always. Don't blame hypercam about that !

Verso Sh4: hypercam.1.01_SH4

Last edited by Smurfer; 08-April-2009 at 15:34..
Reply With Quote


hypercam, instructions, qbox, setup

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

ECS on RSS ECS on Twitter ECS on Facebook ECS on Youtube
Follow us on:

Powered by vBulletin
Copyright 2002 - 2010, Jelsoft Enterprises Ltd.
SEO by vBSEO ©2011, Crawlability, Inc.