Eurocardsharing

Go Back   Eurocardsharing > Sharing receivers > Other sharing receivers

Other sharing receivers Discussion, Openbox S9 new firmware 01 02 2011 at Sharing receivers forum; -http://www.megaupload.com/?d=YAT80Y24 OpenBox S9 Modified L53 Dump.file with Channel List [01 February 2011] This is a modified L53 Dump file, and ...

Reply
 
LinkBack Thread Tools Display Modes
Openbox S9 new firmware 01 02 2011
Old
  (#1)
Data7
Share Hunter
 
Data7's Avatar
 
Offline
Posts: 122

Level: 10 [♥ Bé-Yêu ♥♥ Bé-Yêu ♥]
Life: 0 / 227
Magic: 40 / 5755
Experience: 8%

Thanks: 56
Thanked 45 Times in 26 Posts
Join Date: Apr 2009
Age: 52
Openbox S9 new firmware 01 02 2011 - 04-February-2011, 18:21

-http://www.megaupload.com/?d=YAT80Y24

OpenBox S9 Modified L53 Dump.file with Channel List [01 February 2011]
This is a modified L53 Dump file, and was released on [01 February 2011]
This L53_MOD Dump file is based on the latest firmware version [HDS2-11-01-02:0899CMT]

If you already have the previous L53_Dump file dated [10 January 2011] loaded, you may if you wish just load the updated channel list.

----------------------------------------------------------------------------------------------

To keep your receiver & channel list upto date, go to the following link & download then install the latest channel list,
which I shall try and update on a weekly basis, with only the most relevant changes.

----------------------------------------------------------------------------------------------

Included in all the L53_MOD Dump files, is the latest L53 multi-satellite channel list.
The channel list default motor setting is: DisEqC 1.2.
Coverage of the channel list is: 45east to 30west.
Included in the zip file is a replace.list
Also included is a constant cw file, which contains active Biss keys, mainly for use on 26E 10E 5E & 4W.
The channel list can also be used on a fixed dish setup, simply click the Zoom or SatList button, and select any satellite from the data base that you wish to access.
================================================== =================================

What's New:
A number of new or updated channels on various satellites added.
Re-organised channel list on various satellites.

I believe all the channels that caused rebooting problems, have now all been removed.
To optimize this list & receiver to it's full potential, you will require a full multi-sat coverage cline.
================================================== =================================

Instructions:
Click Menu -> Tools -> Upgrade by USB -> Set Upgrade Mode to Image File -> Upgrade File select HDS2_L53_MOD -> Now select Start and click YES to install.

If this is the first time you have uploaded a Firmware or Dump.file, then you will also need to read the following instructions:-
1 Click Menu -> System Setup -> TV System -> Video Resolution this will return to the default setting of [1080i 60] after each upload, if your TV has a refresh rate of 50Mhz then set the video resolution to [1080i 50] and the picture will become clear now press exit
Now select Local Time Settings and set it as follows if your located in the UK:
1 GMT Usage ... ON
2 GMT Offset .. UTC+00:00
3 Summer Time . OFF
now click exit and exit again
Now select Network Local Setting and if your router supports DHCP then set it to On
otherwise you will need to configure the settings manually, once you have set it up click Apply then exit
Finally click CCcam Plug Setting, if you already have an active cccam.cfg file transfer it to a USB Stick insert the stick into the USB connection on the rear of the receiver and click Update Files By USB then select Option 1 in the popup box and click the OK button then click the Yellow button and your cccam.cfg files will be transfered
Now you need to activate the files, click CCcam Plug Setting then Manage Config Files click Option 1 and select each file in turn and click the OK button when you have a tick next to the files you wish to activate then exit.
To finish the activation and configuration process you must now reboot your receiver, then once it has restarted all should be okay.
The channel list included in the HDS2_L53_MOD file, includes the latest L53 multi-satellite channel list, this is by no means a finished list, and is still an ongoing project WITH REGULAR UPDATES.
================================================== =================================

How to add the replace.list file.
Click Menu -> Network Setup -> MGCamd Plug Settings -> Update Files by USB
-> replace.list [MGCamd Plug] now click either the OK or Green button to select replace.list and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.
You can then if you wish, check to see if the list has been correctly added, by clicking Manage Config Files and clicking on replace.list if all went well, you will see the following example: X: {{ 1833 } { 1702 }}
================================================== =================================

How to add the Constant cw list.
Click Menu -> Network Setup -> CCam Client Setup -> Update Files by USB
-> Constant cw now click either the OK or Green button to select Constant cw and place a check mark next to it, once the check mark or tick is visable click the Yellow button to upload.
You can then if you wish, check to see if the keys have been correctly added, by clicking Manage Config Files and clicking on Constant cw if all went well, you will see all the keys listed.
================================================== =================================

Anyone may use, or share this modified Dump file, all I ask is that you do not remove, or edit the files included in any way, or add any other extra files, which are mainly spam, giving credit to some obscure web site.
Of course we are aware of the fact, that some still have a tendancy to ignore the above request.

NOTE: not my work found on another site thought may be usefull to someone here


rule 7!!!
   
Reply With Quote
The Following 3 Users Say Thank You to Data7 For This Useful Post:
hugokn (26-March-2011), jaapkamphors (07-April-2011), schotelman (05-March-2011)
Reply

Bookmarks

Tags
2011, firmware, openbox


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump



ECS on RSS ECS on Twitter ECS on Facebook ECS on Youtube
Follow us on:

Powered by vBulletin
Copyright 2002 - 2010, Jelsoft Enterprises Ltd.
SEO by vBSEO ©2011, Crawlability, Inc.
Dreambox