Eurocardsharing

Go Back   Eurocardsharing > Sharing receivers > VDR and Kaffeine

VDR and Kaffeine Discussion, Problems with Vdr, Sc, and CCcam... at Sharing receivers forum; Hi at all! I have a pc with Debian Testing, a budget card Skystar2 revision 2.6, Vdr 1.6.0 using Xineliboutput ...

Reply
 
LinkBack Thread Tools Display Modes
Problems with Vdr, Sc, and CCcam...
Old
  (#1)
bronx1984
Junior Member
 
bronx1984's Avatar
 
Offline
Posts: 4

Level: 1 [♥ Bé-Yêu ♥]
Life: 0 / 5
Magic: 1 / 147
Experience: 21%

Thanks: 2
Thanked 2 Times in 2 Posts
Join Date: Nov 2008
Problems with Vdr, Sc, and CCcam... - 29-December-2008, 18:23

Hi at all!

I have a pc with Debian Testing, a budget card Skystar2 revision 2.6, Vdr 1.6.0 using Xineliboutput and SC plugin (thanks to Shalafi for his guide!)
Drivers used for dvb are those included in kernel.

Vdr shows pefectly free Channels, but I can't be able to see chennels with SC plugin.
CCcam 2.0.11 seems to work correctly: It's startted with LD_MODULE (so it create /tmp/camd.socket) and it's connected to about 20 servers with thousands remote cards.

Config settings in cccam.cfg is:
Quote:
################################################## ####################
# Other config settings #
################################################## ####################
# server shall listen on this port pro incoming connections
# default port is 12000, disable server with parm -s or set port 0
#
SERVER LISTEN PORT : 12000

# server can give some info about server and client connections
# and cardinfo using telnet or webbrowser.
#
# Switch on/off access to info
# default is yes
#
#ALLOW TELNETINFO: no
ALLOW WEBINFO: yes

# Show extended client info when showing client list
# default is yes
#
SHOW EXTENEDED CLIENT INFO : yes

# The webinfo service can be protected with a username and password.
# This is switched off by default
#
#WEBINFO USERNAME : cccam
#WEBINFO PASSWORD : cccam

# The telnetinfo service can be protected with a username and password.
# This is switched off by default
#
#TELNETINFO USERNAME : <username>
#TELNETINFO PASSWORD : <password>

# default port for telnet is 16000
# default port for web is 16001
# supported commands:
# info
# activeclients
# clients
# servers
# shares
# providers
# entitlements
# example use:
# echo servers | telnet localhost 16000
# go with your browser to http://ip_CCcam_server:16001
#
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001

# time in seconds to keep On Screen Display active.
# default is 0 (turned off)
#
#ZAP OSD TIME : 3

# username used to show popup (default : root)
#OSD USERNAME : root

# password used to show popup (default : dreambox)
#OSD PASSWORD : dreambox

# port used to show popup (default : 80)
#OSD PORT : 80

# Serial reader config. Add as many as you have attached too your system
# replaces old name 'PHOENIX READER PATH', but still works.
# default is none
# optionally add readertype : phoenix,mouse,uniprog,sc8in1,smartreader+
# (when non readertype given defaults to uniprog (e.g. for mastera))
#
# SERIAL READER : <device> <type>
#
# example
#
#SERIAL READER : /dev/tts/0

# Serial reader smartcard write delay.
# Setting to finetune smartcard write speed, optimal setting depends on speed of system, and
# speed of card. Default value is calculated, but can overrule by setting.
# Use number of microseconds delay between bytes, 0 = no delay, -1 = calculated default
# Note: huge difference between values 0 and 1, because of schedular overhead
#
# SMARTCARD WRITE DELAY : <device> <delay>
#
# example, 10ms write delay on smartcard in reader attached to /dev/ttyUSB0
#
#SMARTCARD WRITE DELAY: /dev/ttyUSB0 10000
#
# NOTE on sc8in1; because 8 smartcards are used on the same devicename, use
# devicename_0 .. devicename_7 for settings which require devicename to make
# settings per smartcard. example /dev/ttyS0_0, /dev/ttyS0_1 ..
# example, 8ms write delay between bytes to smartcard on last sc8in1 channel, attached to /dev/tts/0
#
#SMARTCARD WRITE DELAY: /dev/tts/0_7 8000

# Smartcard clock speed override
# Setting override specified speed for smartcard.
# Don't add setting unless you're sure what you're doing.
# In 99% of the cases the reader selects the optimal speed.
# Adding this setting either slows your card down, or might destroy it.
#
# SMARTCARD CLOCK FREQUENCY : <device> <freq>
#
# example
#
#SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 5500000

# if timing should be shown in OSD and debug output
# default is no (turned off)
#
#SHOW TIMING : yes

# enables mini OSD which shows server(type), cardreader, keys or fta only
# default is no (turned off)
#
#MINI OSD : yes

# turns debugging on and off
# default is no (turned off)
#
#DEBUG : yes


# should CCcam try to read and parse newcamd.conf for server connections
# default is no (turned off)
#
#NEWCAMD CONF : yes


# configure what EMM blocker you want. Add as many as readers you have attached
# default is blocking nothing
#
# B: /dev/sci0 01
# 00 - nothing
# 01 - sa blocked
# 02 - ua blocked
# 04 - ga blocked
# and sum of for combinations
#
#examples
#
#B: /dev/tts/0 07
#B: /dev/sci0 01

# disable all local EMM readers
# saves lots of CPU, but you won't get any updates anymore
# (unless you get updates from your clients)
#
# default: no
#
DISABLE EMM : yes

# with this setting you can
# allow a client on two hops away
# to send the updates to the cardserver
#
# default : no
#
EXTRA EMM LEVEL : no

# with this setting you can
# configure how many emm listeners are started.
# for example use 2 when recording
# and viewing different systems and both need constant updates
#
# default : 1
#
#EMM THREADS : 1

# overrule the nds boxkey (4 byte hex)
#
# BOXKEY: <device> <byte1> <byte2> <byte3> <byte4>
#
#example
#
#BOXKEY: /dev/sci0 00 11 22 33

# set card pin
# * please be very careful with this option as you could lock your card *
#
# PIN: <device> <pin>
#
#example
#
#PIN: /dev/sci0 1234

# overrule the irdeto camkey (8 byte hex), default 11 22 33 44 55 66 77 88
#
# CAMKEY: <device> <byte1> <byte2> <byte3> <byte4> <byte5> <byte6> <byte7> <byte8>
#
#example
#
#CAMKEY: /dev/sci0 11 22 33 44 55 66 77 88

# overrule the irdeto camdata (64 byte hex)
# trailing zero bytes can be omitted
# default for unknown ASC's is 11 22 33 44 55 66 77 88 00 00 .. 00, known ASC's have other defaults
#
# CAMDATA: <device> <byte1> <byte2> <byte3> <byte4> <byte5> <byte6> ... <byte64>
#
#example, when only the first 15 camdata bytes are nonzero
#
#CAMDATA: /dev/sci0 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff

# custom add id's for BEEF patched cards
#
# BEEF ID: <ident1> <ident2> <ident3> <ident4> <ident5> <ident6> <ident7> <ident8> <device>
#
#example
#
#BEEF ID: 4101 0 0 0 0 0 0 0 /dev/sci0

# what Softcam.Key should CCcam try to read
# defaults to /var/keys/SoftCam.Key
#
SOFTKEY FILE : /var/keys/SoftCam.Key


# what AutoRoll.Key should CCcam try to read
# defaults to /var/keys/AutoRoll.Key
#
AUTOROLL FILE : /var/keys/AutoRoll.Key


# what constant.cw should CCcam try to read
# defaults to /var/keys/constant.cw
# file content can be like
#
# ca4:id6:sid4:pmtpid4:ecmpid4:key16(01 02 03...)
#
STATIC CW FILE : /var/keys/constant.cw


# in this file you can configure what CAIDs CCcam should prefer or ignore
# defaults to /var/etc/CCcam.prio
# file content can have ignores (I) and prio lists (P)
#
# note 1: I line affects both for ecm and emm (receive no emm on ignored systems)
# P line only affects ecm choice (emm still received for all available systems, not just the priority system)
#
# note 2: ident 0 means 'all idents'. So 'caid:0' is the same as 'caid'.
#
# note 3: for some systems (e.g. nagra (caid 18xx)), the ident is not known at the time the
# prio lists are checked. In that case, matching is done on caid only, even if the P line
# defines nonzero idents. So for example '1801:401' behaves the same as '1801' in a P line
# I lines work differently, they are checked two times, once before ecm or emm is received, again
# after ecm or emm are received (and nagra ident should be known)
# P lines are only checked once, before ecm received.
#
# note 4: if a P line contains caid:ident pairs which are not available for the current
# channel, that P line is not used for that channel.
# Example, channel has systems 626, 1801:401 then P line with "1801,100:96,626" is ignored by that channel,
# because channel doesn't have 100:96.
# But P line with "1801" works, and also "626,1801" will work for channel
#
# note 5: P lines are parsed in the order in which they are found in the prio file.
# Only the first matching P line is used
#
# situation 1: ignore allways this caid, all idents, on all channels


# I: caid
#
# situation 2: ignore allways this caid/ident pair
# I: caid:ident
#
# situation 3: ignore this caid/ident pair, on channel 'sid'
# I: caid:ident:sid
#
# situation 4: when both caid1 and caid2 exist for a channel, prefer caid1 over caid2
# P: caid1, caid2
#
# situation 5: when caid1:ident1 till caidN:identN exist for a channel, use them in order of this list.
# P: caid1:ident1, caid2:ident2, .., caidN:identN
#
# situation 6: when caid1:ident1 till caidN:identN exist for channel 'sid', use them in order of this list.
# Sid on first caid/ident pair identifies sid for which list is used. All other sids ignore this list.
# P: caid1:ident1:sid, caid2:ident2, .., caidN:identN
#
#CAID PRIO FILE : /var/etc/CCcam.prio

#
# In this file all provider idents are defined
# The info from this file is being used in the web interface
# format:
# <caid><ident> "Provider description"
#
PROVIDERINFO FILE : /var/etc/CCcam.providers

#
# In this file all channel idents are defined
# The info from this file is being used in the web interface
# format:
# caid:ident:sid "Channel description"
#
CHANNELINFO FILE : /var/etc/CCcam.channelinfo

# write wrong logins to file
# defaults is off
#
LOG WARNINGS : /var/log/cccam_warnings.log

# global setting for stealthy login to newcamd/newcs server, N line can overrule
# stealth modes: 0 = disabled, 1 = mgcamd new, 2 = mgcamd old, 3 = evocamd, 4 = generic
# default: 0
#
#NEWCAMD STEALTH : 0

# load balancing between identical cards, list device names of card readers containing identical cards,
# optionally followed by a list of service id's which are to be excluded from loadbalancing
#
# LOADBALANCE : <device1> <device2> .. <devicen> { <exceptsid1>, <exceptsid2> .. , <exceptsidn> }
#
# multiple loadbalance groups can be configured, by adding multiple lines
# warning: restart is required, when loadbalance group config changes
#
#example 1: load balance requests for three identical cards
#
# LOADBALANCE : /dev/ttyS0 /dev/ttyS1 /dev/ttyS2
#
#example 2: load balance requests for two almost identical cards, sid 0df3 and 0de1 are only available
#on one of the cards, so requests for these sids shouldn't be loadbalanced
#
# LOADBALANCE : /dev/ttyS5 /dev/ttyS6 { 0df3,0de1 }

# in version 1.2.1 and lower there was a problem which could lead to disconnecting clients
# in version 1.4.0 network load was significantly reduced
# in version 1.7.0 dangerous password bug was fixed
# in order to take advantage of these fixes, all clients should upgrade
# with this setting you can force that clients at least use a certain version otherwise they are denied when logging in
#
# default : accept all versions
#
#example 1: avoid disconnecting clients problem
#
#MINIMUM CLIENT VERSION : 1.3.0
#
#example 2: achieve network load decrease
#
#MINIMUM CLIENT VERSION : 1.4.0
#
#example 3: don't allow potentially wrong passwords (pre 1.7.0 has password bug)
#
MINIMUM CLIENT VERSION : 2.0.0


# Irdeto smartcards: option to disable smart chid checking for irdeto smartcards.
# Default, only chids advertised by card are accepted.
# This avoids a lot of unwanted card traffic
#
# But if smartcard has hidden/unknown chids, all chids should be tried.
# In that case specify 'TRY ALL CHIDS' option for cardreader.
# Use with care, enabling option causes more card traffic.
# Only use setting when some channels don't work without it.
# note: if even this setting don't help decode all channels, try using
# commandline arg -l, to disable all self-learning features (warning: slower)
#
#TRY ALL CHIDS : <device>
#
#example: card in /dev/ttyUSB0 gets ecm for all possible chids, not
#just the chids it officially supports
#
#TRY ALL CHIDS : /dev/ttyUSB0

# perform smartcard post init commands
#
# POSTINIT : <device> <filename> (<autodelete>)
#
# send commands in 'filename' to 'device', and delete 'filename' when
# optional 'autodelete' argument nonzero
#
#example:
#
#POSTINIT : /dev/sci0 /tmp/postinit
#
#example /tmp/postinit contents:
#c134000003000000
#c13201000a

# Option to override autodetected dvb api version. Restart needed.
#
#DVB API: <value>
#
# <value> <1 = no dvb, 1 = dvb api 1, 3 = dvb api 3>
#
# WARNING: only use when autodetect fails!
#
#example, disable nonworking dvb hardware:
DVB API: 3

# Option to set global share limits
#
#GLOBAL LIMITS: { caid:id(:downhops), caid:id(:downhops), ... }
#
#example:
#
#GLOBAL LIMITS : { 0100:000080, 0622:000000:1, 0500:000000:2 }
#
# all users get no 0100:000080.
# and our 0622:000000 cards only for themself (1 hop down),
# and 0500 cards for themself plus one additional hop down.
# global limits are overridden by client specific limits (see F:)

# Option to reject shares with less than required downhops on clientside
#
#MINIMUM DOWNHOPS: <value>
#
# default: 0 (don't ignore any shares)
#
#example:
#
#MINIMUM DOWNHOPS: 0
#
# ingore shares that have less than 1 'downhops' (i.e. can not be shared
# further down to other clients)
My cardclient.conf has only this line:
Quote:
cccam:127.0.0.1:9000:0/0961,0919,0100,0500,1800,0620,0604,E00,8511,8512,8 513,1702,1801,1722,8501,8502:/tmp/camd.socket
And my setup.conf is:
Quote:
AntiAlias = 1
AudioLanguages =
ChannelEntryTimeout = 1000
ChannelInfoPos = 0
ChannelInfoTime = 5
CurrentChannel = 239
CurrentDolby = 0
CurrentVolume = 180
DefaultLifetime = 99
DefaultPriority = 50
DiSEqC = 0
DisplaySubtitles = 0
EmergencyExit = 1
EPGBugfixLevel = 3
EPGLanguages =
EPGLinger = 0
EPGScanTimeout = 10
FontFix = Courier:Bold
FontFixSize = 20
FontOsd = Sans Serif:Bold
FontOsdSize = 22
FontSml = Sans Serif
FontSmlSize = 18
InitialChannel = 0
InitialVolume = -1
InstantRecordTime = 180
LnbFrequHi = 10600
LnbFrequLo = 9750
LnbSLOF = 11700
MarginStart = 2
MarginStop = 10
MarkInstantRecord = 1
MaxVideoFileSize = 2000
MenuKeyCloses = 0
MenuScrollPage = 1
MenuScrollWrap = 0
MinEventTimeout = 30
MinUserInactivity = 300
MultiSpeedMode = 0
NameInstantRecord = TITLE EPISODE
NextWakeupTime = 0
OSDHeight = 486
OSDLanguage = it_IT
OSDLeft = 56
OSDMessageTime = 1
OSDSkin = sttng
OSDTheme = default
OSDTop = 45
OSDWidth = 624
PauseLifetime = 1
PausePriority = 10
PrimaryDVB = 2
PrimaryLimit = 0
RecordingDirs = 1
ResumeID = 0
SetSystemTime = 0
ShowInfoOnChSwitch = 1
ShowReplayMode = 0
SplitEditedFiles = 0
SubtitleBgTransparency = 0
SubtitleFgTransparency = 0
SubtitleLanguages =
SubtitleOffset = 0
SVDRPTimeout = 300
TimeoutRequChInfo = 1
TimeSource = 0
TimeTransponder = 0
UpdateChannels = 5
UseDolbyDigital = 1
UseSmallFont = 1
UseSubtitle = 1
UseVps = 0
VideoDisplayFormat = 1
VideoFormat = 0
VpsMargin = 120
ZapTimeout = 3
femon.AnalStream = 1
femon.CalcInterval = 20
femon.DisplayMode = 0
femon.GreenLimit = 66
femon.HideMenu = 0
femon.OSDHeight = 480
femon.OSDOffset = 0
femon.Position = 1
femon.RedLimit = 33
femon.ServerIp = 0.0.0.0
femon.ServerPort = 2001
femon.ShowCASystem = 0
femon.Skin = 0
femon.Theme = 0
femon.UpdateInterval = 5
femon.UseSingleArea = 0
femon.UseSvdrp = 0
sc.AutoUpdate = 2
sc.Cardclient.Immediate = 1
sc.ConcurrentFF = 1
sc.EcmCache = 0
sc.ForceTranfer = 1
sc.LocalPriority = 0
sc.LogConfig = 1:3144eb:7fffff,2:1:3f,3:7:3f,4:7:3f,5:7:ff,6:f7f: fff,7:547:1fff,8:7:7,9:7:7,10:7:f,11:f:f,12:7:f,13 :7:7,14:7:3f,15:7:ff,16:3c7:7ff,17:7:7,18:7:3f
sc.LogConsole = 1
sc.LogFile = 1
sc.LogFileLimit = 0
sc.LogFileName = /var/log/vdr-sc$s
sc.LogSyslog = 0
sc.LogUserMsg = 0
sc.Nagra.MinEcmTime = 400
sc.Nagra2.AuxServerAddr = localhost
sc.Nagra2.AuxServerEnable = 0
sc.Nagra2.AuxServerPass = auxserver
sc.Nagra2.AuxServerPort = 7777
sc.Nagra2.DropEMMS = 1
sc.PrestartAU = 0
sc.SC-Cryptoworks.DisableParental = 1
sc.SC-Seca.Blocker = 0
sc.ScCaps = 2 1 0 0 0 0 0 0 0 0
sc.SuperKeys = 0
sc.Viaccess.TpsAU = 0
xineliboutput.Audio.Compression = 100
xineliboutput.Audio.Delay = 0
xineliboutput.Audio.Driver = alsa
xineliboutput.Audio.Equalizer = 0 0 0 0 0 0 0 0 0 0
xineliboutput.Audio.Headphone = 0
xineliboutput.Audio.Port = default
xineliboutput.Audio.SoftwareVolumeControl = 0
xineliboutput.Audio.Speakers = Stereo 2.0
xineliboutput.Audio.Surround = 0
xineliboutput.Audio.Upmix = 0
xineliboutput.Audio.Visualization = goom
xineliboutput.Audio.Visualization.GoomOpts = width=720,height=576,fps=25
xineliboutput.Decoder.PesBuffers = 250
xineliboutput.DisplayAspect = automatic
xineliboutput.Frontend = sxfe
xineliboutput.Fullscreen = 1
xineliboutput.Media.CacheImplicitPlaylists = 1
xineliboutput.Media.EnableID3Scanner = 1
xineliboutput.Modeline =
xineliboutput.OSD.AlphaCorrection = 0
xineliboutput.OSD.AlphaCorrectionAbs = 0
xineliboutput.OSD.Blending = 0
xineliboutput.OSD.BlendingLowRes = 1
xineliboutput.OSD.ExtSubSize = -1
xineliboutput.OSD.HideMainMenu = 0
xineliboutput.OSD.LayersVisible = 4
xineliboutput.OSD.Scaling = 1
xineliboutput.Playlist.Album = 0
xineliboutput.Playlist.Artist = 0
xineliboutput.Playlist.Tracknumber = 0
xineliboutput.Post.denoise3d.chroma = 30
xineliboutput.Post.denoise3d.Enable = 0
xineliboutput.Post.denoise3d.luma = 40
xineliboutput.Post.denoise3d.time = 60
xineliboutput.Post.pp.Enable = 1
xineliboutput.Post.pp.Mode = de
xineliboutput.Post.pp.Quality = 3
xineliboutput.Post.unsharp.chroma_amount = 0
xineliboutput.Post.unsharp.chroma_matrix_height = 3
xineliboutput.Post.unsharp.chroma_matrix_width = 3
xineliboutput.Post.unsharp.Enable = 0
xineliboutput.Post.unsharp.luma_amount = 0
xineliboutput.Post.unsharp.luma_matrix_height = 5
xineliboutput.Post.unsharp.luma_matrix_width = 5
xineliboutput.Remote.AllowHttp = 1
xineliboutput.Remote.AllowHttpCtrl = 0
xineliboutput.Remote.AllowRtsp = 1
xineliboutput.Remote.AllowRtspCtrl = 0
xineliboutput.Remote.Iface =
xineliboutput.Remote.Keyboard = 1
xineliboutput.Remote.ListenPort = 37890
xineliboutput.Remote.LocalIP =
xineliboutput.Remote.Rtp.Address = 224.0.1.9
xineliboutput.Remote.Rtp.AlwaysOn = 0
xineliboutput.Remote.Rtp.Port = 37890
xineliboutput.Remote.Rtp.SapAnnouncements = 1
xineliboutput.Remote.Rtp.TTL = 1
xineliboutput.Remote.UseBroadcast = 1
xineliboutput.Remote.UseHttp = 1
xineliboutput.Remote.UsePipe = 1
xineliboutput.Remote.UseRtp = 1
xineliboutput.Remote.UseTcp = 1
xineliboutput.Remote.UseUdp = 1
xineliboutput.RemoteMode = 0
xineliboutput.Video.AspectRatio = 0
xineliboutput.Video.AutoCrop = 0
xineliboutput.Video.AutoCrop.AutoDetect = 1
xineliboutput.Video.AutoCrop.DetectSubs = 1
xineliboutput.Video.AutoCrop.FixedSize = 1
xineliboutput.Video.AutoCrop.SoftStart = 1
xineliboutput.Video.Brightness = -1
xineliboutput.Video.Contrast = -1
xineliboutput.Video.Deinterlace = none
xineliboutput.Video.DeinterlaceOptions = method=Linear,cheap_mode=1,pulldown=none,framerate _mode=full,judder_correction=1,use_progressive_fra me_flag=1,chroma_filter=0,enabled=1
xineliboutput.Video.Driver = xv
xineliboutput.Video.FieldOrder = 0
xineliboutput.Video.HUE = -1
xineliboutput.Video.IBPTrickSpeed = 0
xineliboutput.Video.MaxTrickSpeed = 12
xineliboutput.Video.Overscan = 0
xineliboutput.Video.Port = 0.0
xineliboutput.Video.Saturation = -1
xineliboutput.Video.Scale = 1
xineliboutput.Video.SwScale = 0
xineliboutput.Video.SwScale.Aspect = 0
xineliboutput.Video.SwScale.Downscale = 0
xineliboutput.Video.SwScale.Height = 576
xineliboutput.Video.SwScale.Resize = 0
xineliboutput.Video.SwScale.Width = 720
xineliboutput.VideoModeSwitching = 1
xineliboutput.X11.UseKeyboard = 1
xineliboutput.X11.WindowHeight = 576
xineliboutput.X11.WindowWidth = 720
When I select a crypted channel in Vdr, it starts asking key to cccam, but I never watch anything: I post a log of an attempt to view a channel:
Quote:
dic 29 17:15:08 [core.ci] 0.0 -> 00 01 a0 0f 01 90 02 00 01 9f 80 32 06 05 2d ca 01 00 00
dic 29 17:15:08 [core.ci] 0.0 CA_PMT decoding len=6 lm=5 prg=11722 len=0/0
dic 29 17:15:08 [core.ci] 0.0 got CA pmt ciCmd=-1 caLm=5
dic 29 17:15:08 [core.ci] 0.0 set CAM decrypt (prg 11722)
dic 29 17:15:08 [core.pids] 0: update SID 11722 (zero=0 noshift=1)
dic 29 17:15:08 [core.pids] 0: SID=11722 zero=0 | sid=1/11722/0 zero=-/-/- idle=-/-/-
dic 29 17:15:08 [core.pids] 0: found handler for SID 11722 (0.1 idle=0 idx=1)
dic 29 17:15:08 [core.pids] 0.1: pids on entry VIDEO=00a6 AUDIO=01a8 AUDIO=01a9 DOLBY=01aa
dic 29 17:15:08 [core.pids] 0.1: pids after delete
dic 29 17:15:08 [core.pids] 0.1: pids after add
dic 29 17:15:08 [core.ecm] 0.1: is idle now
dic 29 17:15:08 [core.ci] 0.0 -> 00 01 a0 10 01 90 02 00 01 9f 80 32 07 03 00 00 01 00 01 04
dic 29 17:15:08 [core.ci] 0.0 CA_PMT decoding len=7 lm=3 prg=0 len=1/1 ci_cmd(G)=04
dic 29 17:15:08 [core.ci] 0.0 got CA pmt ciCmd=4 caLm=3
dic 29 17:15:08 [core.pids] 0: now tuned to source 8882 transponder 33c42
dic 29 17:15:08 [core.ecm] 0.1: stop
dic 29 17:15:08 [core.ecm] 0.1: triggered SID 11722/-1 idx 1/1 mode 3/-1 -
dic 29 17:15:09 [core.ci] 0.0 -> 00 01 a0 3f 01 90 02 00 01 9f 80 32 36 04 2b 5d 01 00 00 02 00 a0 00 07 01 09 04 09 19 e6 40 04 01 90 00 07 01 09 04 09 19 e6 40 04 01 91 00 07 01 09 04 09 19 e6 40 06 01 92 00 07 01 09 04 09 19 e6 40
dic 29 17:15:09 [core.ci] 0.0 CA_PMT decoding len=36 lm=4 prg=11101 len=0/30 pid=2,a0 len=7/2b ci_cmd(S)=1 pid=4,190 len=7/1f ci_cmd(S)=1 pid=4,191 len=7/13 ci_cmd(S)=1 pid=6,192 len=7/7 ci_cmd(S)=1
dic 29 17:15:09 [core.ci] 0.0 got CA pmt ciCmd=1 caLm=4
dic 29 17:15:09 [core.ci] 0.0 set CAM decrypt (prg 11101)
dic 29 17:15:09 [core.pids] 0: add SID 11101 (zero=0 noshift=1)
dic 29 17:15:09 [core.pids] 0: pids VIDEO=00a0 AUDIO=0190 AUDIO=0191 DOLBY=0192
dic 29 17:15:09 [core.pids] 0: SID=11101 zero=0 | sid=-/-/- zero=-/-/- idle=1/-1/1
dic 29 17:15:09 [core.pids] 0: found handler for SID 11101 (0.1 idle=1 idx=1)
dic 29 17:15:09 [core.ecm] 0.1: setting new SID 11101
dic 29 17:15:09 [core.pids] 0.1: pids on entry
dic 29 17:15:09 [core.pids] 0.1: pids after delete
dic 29 17:15:09 [core.pids] 0: descrambling pid 00a0 on index 1
dic 29 17:15:09 [core.pids] 0: descrambling pid 0190 on index 1
dic 29 17:15:09 [core.pids] 0: descrambling pid 0191 on index 1
dic 29 17:15:09 [core.pids] 0: descrambling pid 0192 on index 1
dic 29 17:15:09 [core.pids] 0.1: pids after add VIDEO=00a0 AUDIO=0190 AUDIO=0191 DOLBY=0192
dic 29 17:15:09 [core.ecm] 0.1: is no longer idle
dic 29 17:15:09 [core.ecm] 0.1: triggered SID -1/11101 idx 1/1 mode -1/0 -
dic 29 17:15:09 [core.ecm] 0.1: got CaDescriptors for SID 11101 (len=12)
dic 29 17:15:09 [core.ecm] 0.1: descriptor 09 19 e6 40
dic 29 17:15:09 [core.ecm] 0.1: found 0919 (Fake-NDS) id 0000 with ecm 640 (new)
dic 29 17:15:09 [core.ecm] 0.1: descriptor 09 3b e6 a4
dic 29 17:15:09 [core.ecm] 0.1: found 093b (Fake-NDS) id 0000 with ecm 6a4 (new)
dic 29 17:15:09 [core.ecm] 0.1: try system Fake-NDS (0919) id 0000 with ecm 640 (pri=-12)
dic 29 17:15:09 [nds.ecm] IRD block length check failed
dic 29 17:15:09 [core.au] 0: chain caid 0919 -> none available
dic 29 17:15:09 [core.au] 0: chain caid 093b -> none available
dic 29 17:15:09 [core.ecm] 0.1: try system Fake-NDS (093b) id 0000 with ecm 6a4 (pri=-12)
dic 29 17:15:09 [core.au] 0: chain caid 0919 -> none available
dic 29 17:15:09 [core.au] 0: chain caid 093b -> none available
dic 29 17:15:09 [nds.ecm] IRD block length check failed
dic 29 17:15:09 [core.au] 0: chain caid 0919 -> none available
dic 29 17:15:09 [core.au] 0: chain caid 093b -> none available
dic 29 17:15:09 [core.caids] 0: building caid lists
dic 29 17:15:09 [core.caids] 0: after unique
dic 29 17:15:09 [core.caids] 0: channel 8514/8882/33830 0100
dic 29 17:15:09 [core.caids] 0: channel 15371/8882/1b273 093b 0919
dic 29 17:15:09 [core.caids] 0: channel 14003/8882/1b3a6 0500
dic 29 17:15:09 [core.caids] 0: channel 8402/8882/1b2c0 2600
dic 29 17:15:09 [core.caids] 0: channel 495/8882/1b24b 0e00
dic 29 17:15:09 [core.caids] 0: channel 4922/8882/1b24b 0d01
dic 29 17:15:09 [core.caids] 0: channel 507/8882/1b834 0500 0100
dic 29 17:15:09 [core.caids] 0: channel 5111/8882/1b37f 1803 0100
dic 29 17:15:09 [core.caids] 0: channel 10518/8882/1b69c 1803
dic 29 17:15:09 [core.caids] 0: channel 3508/8882/1b4a9 0b01
dic 29 17:15:09 [core.caids] 0: channel 14901/8882/1b6c2 0b01 0500
dic 29 17:15:09 [core.caids] 0: channel 317/8882/1b4cf 0604
dic 29 17:15:09 [core.caids] 0: channel 14804/8882/1b6c2 0b00 0500
dic 29 17:15:09 [core.caids] 0: channel 10624/8882/1b75c 0608
dic 29 17:15:09 [core.caids] 0: channel 10/8882/33883 0d00 0b01 0100
dic 29 17:15:09 [core.caids] 0: channel 4807/8882/1b12c 0b01 0b00 0500 0100
dic 29 17:15:09 [core.caids] 0: channel 7371/8882/33cdc 1803 1801
dic 29 17:15:09 [core.caids] 0: channel 13103/8882/338d6 1803 1801 0100
dic 29 17:15:09 [core.caids] 0: channel 8003/8882/1b1ce 0d02
dic 29 17:15:09 [core.caids] 0: channel 13526/8882/33a81 1801 0500
dic 29 17:15:09 [core.caids] 0: channel 8429/8882/1b2c0 0b01 093b 0919
dic 29 17:15:09 [core.caids] 0: channel 7301/8882/1b221 0604 0500
dic 29 17:15:09 [core.caids] 0: channel 13834/8882/33928 1803 0b01 0604 0500 0100
dic 29 17:15:09 [core.caids] 0: channel 13802/8882/33928 1803 0d06 0b01 0604 0500 0100
dic 29 17:15:09 [core.caids] 0: channel 3506/8882/1b4a9 0b01 0b00
dic 29 17:15:09 [core.caids] 0: channel 5107/8882/1b37f 0b01 0b00 0100
dic 29 17:15:09 [core.caids] 0: channel 8033/8882/1b1ce 0d00 0500
dic 29 17:15:09 [core.caids] 0: channel 105/8882/1b675 0604 0500 0100
dic 29 17:15:09 [core.caids] 0: channel 2/8882/33883 1803 0d00 0b01 0100
dic 29 17:15:09 [core.caids] 0: channel 6/8882/33883 0d00
dic 29 17:15:09 [core.caids] 0: channel 4605/8882/1b083 0d03
dic 29 17:15:09 [core.caids] 0: channel 607/8882/1b3f4 0b00
dic 29 17:15:09 [core.caids] 0: channel 14215/8882/1b333 4abf 0b02 0628 0500
dic 29 17:15:09 [core.caids] 0: channel 14001/8882/1b6e8 0b00 0610 0500
dic 29 17:15:09 [core.caids] 0: channel 14006/8882/1b6e8 0610
dic 29 17:15:09 [core.caids] 0: channel 14007/8882/1b6e8 0610 0500
dic 29 17:15:09 [core.caids] 0: channel 8621/8882/1b105 0630 0628 0626 0500
dic 29 17:15:09 [core.caids] 0: channel 134/8882/1b64f 4aa1 0b00 0630 0628 0626 0500
dic 29 17:15:09 [core.caids] 0: channel 4601/8882/1b083 0602 0500
dic 29 17:15:09 [core.caids] 0: channel 8632/8882/1b105 4aa1 0630 0626 0500
dic 29 17:15:09 [core.caids] 0: channel 103/8882/1b1a5 22e3
dic 29 17:15:09 [core.caids] 0: after check
dic 29 17:15:09 [core.caids] 0: channel 8514/8882/33830 0100
dic 29 17:15:09 [core.caids] 0: channel 15371/8882/1b273 093b 0919
dic 29 17:15:09 [core.caids] 0: channel 14003/8882/1b3a6 0500
dic 29 17:15:09 [core.caids] 0: channel 8402/8882/1b2c0
dic 29 17:15:09 [core.caids] 0: channel 495/8882/1b24b
dic 29 17:15:09 [core.caids] 0: channel 4922/8882/1b24b 0d01
dic 29 17:15:09 [core.caids] 0: channel 507/8882/1b834 0500 0100
dic 29 17:15:09 [core.caids] 0: channel 5111/8882/1b37f 1803 0100
dic 29 17:15:09 [core.caids] 0: channel 10518/8882/1b69c 1803
dic 29 17:15:09 [core.caids] 0: channel 3508/8882/1b4a9 0b01
dic 29 17:15:09 [core.caids] 0: channel 14901/8882/1b6c2 0b01 0500
dic 29 17:15:09 [core.caids] 0: channel 317/8882/1b4cf 0604
dic 29 17:15:09 [core.caids] 0: channel 14804/8882/1b6c2 0b00 0500
dic 29 17:15:09 [core.caids] 0: channel 10624/8882/1b75c 0608
dic 29 17:15:09 [core.caids] 0: channel 10/8882/33883 0d00 0b01 0100
dic 29 17:15:09 [core.caids] 0: channel 4807/8882/1b12c 0b01 0b00 0500 0100
dic 29 17:15:09 [core.caids] 0: channel 7371/8882/33cdc 1803 1801
dic 29 17:15:09 [core.caids] 0: channel 13103/8882/338d6 1803 1801 0100
dic 29 17:15:09 [core.caids] 0: channel 8003/8882/1b1ce 0d02
dic 29 17:15:09 [core.caids] 0: channel 13526/8882/33a81 1801 0500
dic 29 17:15:09 [core.caids] 0: channel 8429/8882/1b2c0 0b01 093b 0919
dic 29 17:15:09 [core.caids] 0: channel 7301/8882/1b221 0604 0500
dic 29 17:15:09 [core.caids] 0: channel 13834/8882/33928 1803 0b01 0604 0500 0100
dic 29 17:15:09 [core.caids] 0: channel 13802/8882/33928 1803 0d06 0b01 0604 0500 0100
dic 29 17:15:09 [core.caids] 0: channel 3506/8882/1b4a9 0b01 0b00
dic 29 17:15:09 [core.caids] 0: channel 5107/8882/1b37f 0b01 0b00 0100
dic 29 17:15:09 [core.caids] 0: channel 8033/8882/1b1ce 0d00 0500
dic 29 17:15:09 [core.caids] 0: channel 105/8882/1b675 0604 0500 0100
dic 29 17:15:09 [core.caids] 0: channel 2/8882/33883 1803 0d00 0b01 0100
dic 29 17:15:09 [core.caids] 0: channel 6/8882/33883 0d00
dic 29 17:15:09 [core.caids] 0: channel 4605/8882/1b083 0d03
dic 29 17:15:09 [core.caids] 0: channel 607/8882/1b3f4 0b00
dic 29 17:15:09 [core.caids] 0: channel 14215/8882/1b333 0b02 0628 0500
dic 29 17:15:09 [core.caids] 0: channel 14001/8882/1b6e8 0b00 0610 0500
dic 29 17:15:09 [core.caids] 0: channel 14006/8882/1b6e8 0610
dic 29 17:15:09 [core.caids] 0: channel 14007/8882/1b6e8 0610 0500
dic 29 17:15:09 [core.caids] 0: channel 8621/8882/1b105 0630 0628 0626 0500
dic 29 17:15:09 [core.caids] 0: channel 134/8882/1b64f 0b00 0630 0628 0626 0500
dic 29 17:15:09 [core.caids] 0: channel 4601/8882/1b083 0602 0500
dic 29 17:15:09 [core.caids] 0: channel 8632/8882/1b105 0630 0626 0500
dic 29 17:15:09 [core.caids] 0: channel 103/8882/1b1a5
dic 29 17:15:09 [core.caids] 0: after unique
dic 29 17:15:09 [core.caids] 0: channel 8514/8882/33830 0100
dic 29 17:15:09 [core.caids] 0: channel 15371/8882/1b273 093b 0919
dic 29 17:15:09 [core.caids] 0: channel 14003/8882/1b3a6 0500
dic 29 17:15:09 [core.caids] 0: channel 4922/8882/1b24b 0d01
dic 29 17:15:09 [core.caids] 0: channel 507/8882/1b834 0500 0100
dic 29 17:15:09 [core.caids] 0: channel 5111/8882/1b37f 1803 0100
dic 29 17:15:09 [core.caids] 0: channel 10518/8882/1b69c 1803
dic 29 17:15:09 [core.caids] 0: channel 3508/8882/1b4a9 0b01
dic 29 17:15:09 [core.caids] 0: channel 14901/8882/1b6c2 0b01 0500
dic 29 17:15:09 [core.caids] 0: channel 317/8882/1b4cf 0604
dic 29 17:15:09 [core.caids] 0: channel 14804/8882/1b6c2 0b00 0500
dic 29 17:15:09 [core.caids] 0: channel 10624/8882/1b75c 0608
dic 29 17:15:09 [core.caids] 0: channel 10/8882/33883 0d00 0b01 0100
dic 29 17:15:09 [core.caids] 0: channel 4807/8882/1b12c 0b01 0b00 0500 0100
dic 29 17:15:09 [core.caids] 0: channel 7371/8882/33cdc 1803 1801
dic 29 17:15:09 [core.caids] 0: channel 13103/8882/338d6 1803 1801 0100
dic 29 17:15:09 [core.caids] 0: channel 8003/8882/1b1ce 0d02
dic 29 17:15:09 [core.caids] 0: channel 13526/8882/33a81 1801 0500
dic 29 17:15:09 [core.caids] 0: channel 8429/8882/1b2c0 0b01 093b 0919
dic 29 17:15:09 [core.caids] 0: channel 7301/8882/1b221 0604 0500
dic 29 17:15:09 [core.caids] 0: channel 13834/8882/33928 1803 0b01 0604 0500 0100
dic 29 17:15:09 [core.caids] 0: channel 13802/8882/33928 1803 0d06 0b01 0604 0500 0100
dic 29 17:15:09 [core.caids] 0: channel 3506/8882/1b4a9 0b01 0b00
dic 29 17:15:09 [core.caids] 0: channel 5107/8882/1b37f 0b01 0b00 0100
dic 29 17:15:09 [core.caids] 0: channel 8033/8882/1b1ce 0d00 0500
dic 29 17:15:09 [core.caids] 0: channel 105/8882/1b675 0604 0500 0100
dic 29 17:15:09 [core.caids] 0: channel 2/8882/33883 1803 0d00 0b01 0100
dic 29 17:15:09 [core.caids] 0: channel 6/8882/33883 0d00
dic 29 17:15:09 [core.caids] 0: channel 4605/8882/1b083 0d03
dic 29 17:15:09 [core.caids] 0: channel 607/8882/1b3f4 0b00
dic 29 17:15:09 [core.caids] 0: channel 14215/8882/1b333 0b02 0628 0500
dic 29 17:15:09 [core.caids] 0: channel 14001/8882/1b6e8 0b00 0610 0500
dic 29 17:15:09 [core.caids] 0: channel 14006/8882/1b6e8 0610
dic 29 17:15:09 [core.caids] 0: channel 14007/8882/1b6e8 0610 0500
dic 29 17:15:09 [core.caids] 0: channel 8621/8882/1b105 0630 0628 0626 0500
dic 29 17:15:09 [core.caids] 0: channel 134/8882/1b64f 0b00 0630 0628 0626 0500
dic 29 17:15:09 [core.caids] 0: channel 4601/8882/1b083 0602 0500
dic 29 17:15:09 [core.caids] 0: channel 8632/8882/1b105 0630 0626 0500
dic 29 17:15:09 [core.caids] 0: added 0500 caids now 0500
dic 29 17:15:09 [core.caids] 0: still left
dic 29 17:15:09 [core.caids] 0: channel 8514/8882/33830 0100
dic 29 17:15:09 [core.caids] 0: channel 15371/8882/1b273 093b 0919
dic 29 17:15:09 [core.caids] 0: channel 4922/8882/1b24b 0d01
dic 29 17:15:09 [core.caids] 0: channel 5111/8882/1b37f 1803 0100
dic 29 17:15:09 [core.caids] 0: channel 10518/8882/1b69c 1803
dic 29 17:15:09 [core.caids] 0: channel 3508/8882/1b4a9 0b01
dic 29 17:15:09 [core.caids] 0: channel 317/8882/1b4cf 0604
dic 29 17:15:09 [core.caids] 0: channel 10624/8882/1b75c 0608
dic 29 17:15:09 [core.caids] 0: channel 10/8882/33883 0d00 0b01 0100
dic 29 17:15:09 [core.caids] 0: channel 7371/8882/33cdc 1803 1801
dic 29 17:15:09 [core.caids] 0: channel 13103/8882/338d6 1803 1801 0100
dic 29 17:15:09 [core.caids] 0: channel 8003/8882/1b1ce 0d02
dic 29 17:15:09 [core.caids] 0: channel 8429/8882/1b2c0 0b01 093b 0919
dic 29 17:15:09 [nds.ecm] IRD block length check failed
dic 29 17:15:09 [core.caids] 0: channel 3506/8882/1b4a9 0b01 0b00
dic 29 17:15:09 [core.caids] 0: channel 5107/8882/1b37f 0b01 0b00 0100
dic 29 17:15:09 [core.caids] 0: channel 2/8882/33883 1803 0d00 0b01 0100
dic 29 17:15:09 [core.caids] 0: channel 6/8882/33883 0d00
dic 29 17:15:09 [core.caids] 0: channel 4605/8882/1b083 0d03
dic 29 17:15:09 [core.caids] 0: channel 607/8882/1b3f4 0b00
dic 29 17:15:09 [core.caids] 0: channel 14006/8882/1b6e8 0610
dic 29 17:15:09 [core.caids] 0: added 0100 caids now 0500 0100
dic 29 17:15:09 [core.caids] 0: still left
dic 29 17:15:09 [core.caids] 0: channel 15371/8882/1b273 093b 0919
dic 29 17:15:09 [core.caids] 0: channel 4922/8882/1b24b 0d01
dic 29 17:15:09 [core.caids] 0: channel 10518/8882/1b69c 1803
dic 29 17:15:09 [core.caids] 0: channel 3508/8882/1b4a9 0b01
dic 29 17:15:09 [core.caids] 0: channel 317/8882/1b4cf 0604
dic 29 17:15:09 [core.caids] 0: channel 10624/8882/1b75c 0608
dic 29 17:15:09 [core.caids] 0: channel 7371/8882/33cdc 1803 1801
dic 29 17:15:09 [core.caids] 0: channel 8003/8882/1b1ce 0d02
dic 29 17:15:09 [core.caids] 0: channel 8429/8882/1b2c0 0b01 093b 0919
dic 29 17:15:09 [core.caids] 0: channel 3506/8882/1b4a9 0b01 0b00
dic 29 17:15:09 [core.caids] 0: channel 6/8882/33883 0d00
dic 29 17:15:09 [core.caids] 0: channel 4605/8882/1b083 0d03
dic 29 17:15:09 [core.caids] 0: channel 607/8882/1b3f4 0b00
dic 29 17:15:09 [core.caids] 0: channel 14006/8882/1b6e8 0610
dic 29 17:15:09 [core.caids] 0: added 0b01 caids now 0500 0100 0b01
dic 29 17:15:09 [core.caids] 0: still left
dic 29 17:15:09 [core.caids] 0: channel 15371/8882/1b273 093b 0919
dic 29 17:15:09 [core.caids] 0: channel 4922/8882/1b24b 0d01
dic 29 17:15:09 [core.caids] 0: channel 10518/8882/1b69c 1803
dic 29 17:15:09 [core.caids] 0: channel 317/8882/1b4cf 0604
dic 29 17:15:09 [core.caids] 0: channel 10624/8882/1b75c 0608
dic 29 17:15:09 [core.caids] 0: channel 7371/8882/33cdc 1803 1801
dic 29 17:15:09 [core.caids] 0: channel 8003/8882/1b1ce 0d02
dic 29 17:15:09 [core.caids] 0: channel 6/8882/33883 0d00
dic 29 17:15:09 [core.caids] 0: channel 4605/8882/1b083 0d03
dic 29 17:15:09 [core.caids] 0: channel 607/8882/1b3f4 0b00
dic 29 17:15:09 [core.caids] 0: channel 14006/8882/1b6e8 0610
dic 29 17:15:09 [core.caids] 0: added 1803 caids now 0500 0100 0b01 1803
dic 29 17:15:09 [core.caids] 0: still left
dic 29 17:15:09 [core.caids] 0: channel 15371/8882/1b273 093b 0919
dic 29 17:15:09 [core.caids] 0: channel 4922/8882/1b24b 0d01
dic 29 17:15:09 [core.caids] 0: channel 317/8882/1b4cf 0604
dic 29 17:15:09 [core.caids] 0: channel 10624/8882/1b75c 0608
dic 29 17:15:09 [core.caids] 0: channel 8003/8882/1b1ce 0d02
dic 29 17:15:09 [core.caids] 0: channel 6/8882/33883 0d00
dic 29 17:15:09 [core.caids] 0: channel 4605/8882/1b083 0d03
dic 29 17:15:09 [core.caids] 0: channel 607/8882/1b3f4 0b00
dic 29 17:15:09 [core.caids] 0: channel 14006/8882/1b6e8 0610
dic 29 17:15:09 [core.caids] 0: added 0604 caids now 0500 0100 0b01 1803 0604
dic 29 17:15:09 [core.caids] 0: still left
dic 29 17:15:09 [core.caids] 0: channel 15371/8882/1b273 093b 0919
dic 29 17:15:09 [core.caids] 0: channel 4922/8882/1b24b 0d01
dic 29 17:15:09 [core.caids] 0: channel 10624/8882/1b75c 0608
dic 29 17:15:09 [core.caids] 0: channel 8003/8882/1b1ce 0d02
dic 29 17:15:09 [core.caids] 0: channel 6/8882/33883 0d00
dic 29 17:15:09 [core.caids] 0: channel 4605/8882/1b083 0d03
dic 29 17:15:09 [core.caids] 0: channel 607/8882/1b3f4 0b00
dic 29 17:15:09 [core.caids] 0: channel 14006/8882/1b6e8 0610
dic 29 17:15:09 [core.caids] 0: added 0608 caids now 0500 0100 0b01 1803 0604 0608
dic 29 17:15:09 [core.caids] 0: still left
dic 29 17:15:09 [core.caids] 0: channel 15371/8882/1b273 093b 0919
dic 29 17:15:09 [core.caids] 0: channel 4922/8882/1b24b 0d01
dic 29 17:15:09 [core.caids] 0: channel 8003/8882/1b1ce 0d02
dic 29 17:15:09 [core.caids] 0: channel 6/8882/33883 0d00
dic 29 17:15:09 [core.caids] 0: channel 4605/8882/1b083 0d03
dic 29 17:15:09 [core.caids] 0: channel 607/8882/1b3f4 0b00
dic 29 17:15:09 [core.caids] 0: channel 14006/8882/1b6e8 0610
dic 29 17:15:09 [core.caids] 0: added 0610 caids now 0500 0100 0b01 1803 0604 0608 0610
dic 29 17:15:09 [core.caids] 0: still left
dic 29 17:15:09 [core.caids] 0: channel 15371/8882/1b273 093b 0919
dic 29 17:15:09 [core.caids] 0: channel 4922/8882/1b24b 0d01
dic 29 17:15:09 [core.caids] 0: channel 8003/8882/1b1ce 0d02
dic 29 17:15:09 [core.caids] 0: channel 6/8882/33883 0d00
dic 29 17:15:09 [core.caids] 0: channel 4605/8882/1b083 0d03
dic 29 17:15:09 [core.caids] 0: channel 607/8882/1b3f4 0b00
dic 29 17:15:09 [core.caids] 0: added 0919 caids now 0500 0100 0b01 1803 0604 0608 0610 0919
dic 29 17:15:09 [core.caids] 0: still left
dic 29 17:15:09 [core.caids] 0: channel 4922/8882/1b24b 0d01
dic 29 17:15:09 [core.caids] 0: channel 8003/8882/1b1ce 0d02
dic 29 17:15:09 [core.caids] 0: channel 6/8882/33883 0d00
dic 29 17:15:09 [core.caids] 0: channel 4605/8882/1b083 0d03
dic 29 17:15:09 [core.caids] 0: channel 607/8882/1b3f4 0b00
dic 29 17:15:09 [core.caids] 0: added 0b00 caids now 0500 0100 0b01 1803 0604 0608 0610 0919 0b00
dic 29 17:15:09 [core.caids] 0: still left
dic 29 17:15:09 [core.caids] 0: channel 4922/8882/1b24b 0d01
dic 29 17:15:09 [core.caids] 0: channel 8003/8882/1b1ce 0d02
dic 29 17:15:09 [core.caids] 0: channel 6/8882/33883 0d00
dic 29 17:15:09 [core.caids] 0: channel 4605/8882/1b083 0d03
dic 29 17:15:09 [core.caids] 0: added 0d00 caids now 0500 0100 0b01 1803 0604 0608 0610 0919 0b00 0d00
dic 29 17:15:09 [core.caids] 0: still left
dic 29 17:15:09 [core.caids] 0: channel 4922/8882/1b24b 0d01
dic 29 17:15:09 [core.caids] 0: channel 8003/8882/1b1ce 0d02
dic 29 17:15:09 [core.caids] 0: channel 4605/8882/1b083 0d03
dic 29 17:15:09 [core.caids] 0: added 0d01 caids now 0500 0100 0b01 1803 0604 0608 0610 0919 0b00 0d00 0d01
dic 29 17:15:09 [core.caids] 0: still left
dic 29 17:15:09 [core.caids] 0: channel 8003/8882/1b1ce 0d02
dic 29 17:15:09 [core.caids] 0: channel 4605/8882/1b083 0d03
dic 29 17:15:09 [core.caids] 0: added 0d02 caids now 0500 0100 0b01 1803 0604 0608 0610 0919 0b00 0d00 0d01 0d02
dic 29 17:15:09 [core.caids] 0: still left
dic 29 17:15:09 [core.caids] 0: channel 4605/8882/1b083 0d03
dic 29 17:15:09 [core.caids] 0: added 0d03 caids now 0500 0100 0b01 1803 0604 0608 0610 0919 0b00 0d00 0d01 0d02 0d03
dic 29 17:15:09 [core.ecm] 0.1: got CaDescriptors for SID 11101 (len=12)
dic 29 17:15:09 [core.ecm] 0.1: descriptor 09 19 e6 40
dic 29 17:15:09 [core.ecm] 0.1: found 0919 (Fake-NDS) id 0000 with ecm 640 (already present)
dic 29 17:15:09 [core.ecm] 0.1: descriptor 09 3b e6 a4
dic 29 17:15:09 [core.ecm] 0.1: found 093b (Fake-NDS) id 0000 with ecm 6a4 (already present)
dic 29 17:15:09 [core.ecm] 0.1: try system Fake-NDS (0919) id 0000 with ecm 640 (pri=-12)
dic 29 17:15:09 [nds.ecm] IRD block length check failed
dic 29 17:15:09 [core.ecm] 0.1: try system Fake-NDS (093b) id 0000 with ecm 6a4 (pri=-12)
dic 29 17:15:10 [nds.ecm] IRD block length check failed
dic 29 17:15:10 [core.ecm] 0.1: got CaDescriptors for SID 11101 (len=12)
dic 29 17:15:10 [core.ecm] 0.1: descriptor 09 19 e6 40
dic 29 17:15:10 [core.ecm] 0.1: found 0919 (Fake-NDS) id 0000 with ecm 640 (already present)
dic 29 17:15:10 [core.ecm] 0.1: descriptor 09 3b e6 a4
dic 29 17:15:10 [core.ecm] 0.1: found 093b (Fake-NDS) id 0000 with ecm 6a4 (already present)
dic 29 17:15:10 [core.ecm] 0.1: try system Fake-NDS (0919) id 0000 with ecm 640 (pri=-12)
dic 29 17:15:19 [nds.ecm] IRD block length check failed
dic 29 17:15:19 [core.ecm] 0.1: try system Fake-NDS (093b) id 0000 with ecm 6a4 (pri=-12)
dic 29 17:15:19 [nds.ecm] IRD block length check failed
dic 29 17:15:19 [core.ecm] 0.1: got CaDescriptors for SID 11101 (len=12)
dic 29 17:15:19 [core.ecm] 0.1: descriptor 09 19 e6 40
dic 29 17:15:19 [core.ecm] 0.1: found 0919 (Fake-NDS) id 0000 with ecm 640 (already present)
dic 29 17:15:19 [core.ecm] 0.1: descriptor 09 3b e6 a4
dic 29 17:15:19 [core.ecm] 0.1: found 093b (Fake-NDS) id 0000 with ecm 6a4 (already present)
dic 29 17:15:19 [core.ecm] 0.1: try system Fake-NDS (0919) id 0000 with ecm 640 (pri=-12)
dic 29 17:15:19 [core.ecm] 0.1: stopping message log until valid key is found
This is for NDS, but with any other type, log ends with:
Quote:
stopping message log until valid key is found
What can be the problem? I tried changing some configuration reading the forum, but with no result...

Can someone help me???

Thanks a lot!!!
   
Reply With Quote
The Following User Says Thank You to bronx1984 For This Useful Post:
Goldsack (17-September-2010)
Old
  (#2)
shalafi
ECS Master
 
shalafi's Avatar
 
Offline
Posts: 412

Level: 18 [♥ Bé-Yêu ♥♥ Bé-Yêu ♥]
Life: 0 / 446
Magic: 137 / 13880
Experience: 87%

Thanks: 127
Thanked 492 Times in 131 Posts
Join Date: Jul 2007
29-December-2008, 20:41

Be sure to start CCcam with ca.so preload (you can download http://shalafi.ath.cx/vdr/CCcam.tar.bz2 which has this included, check the /var/bin location for ca.c and run.sh. You need this). Also, if your DVB-card has a ca0 file present in /dev/dvb/adapter0 (example), remove that. It interferes with the ca.so preload and then it won't open the channel.

And make sure you have the following in your cardclient.conf :

cccam:127.0.0.1:9000:1/0000/0000:tmp/camd.socket

//Shalafi


-=[ Ubuntu Linux 9.04 | VDR 1.7.9 | HVR-4000 | eHD | Wavefield T55]=-
   
Reply With Quote
Sponsored Links
Old
  (#3)
bronx1984
Junior Member
 
bronx1984's Avatar
 
Offline
Posts: 4

Level: 1 [♥ Bé-Yêu ♥]
Life: 0 / 5
Magic: 1 / 147
Experience: 21%

Thanks: 2
Thanked 2 Times in 2 Posts
Join Date: Nov 2008
29-December-2008, 22:33

Quote:
Originally Posted by shalafi View Post
Be sure to start CCcam with ca.so preload (you can download http://shalafi.ath.cx/vdr/CCcam.tar.bz2 which has this included, check the /var/bin location for ca.c and run.sh. You need this). Also, if your DVB-card has a ca0 file present in /dev/dvb/adapter0 (example), remove that. It interferes with the ca.so preload and then it won't open the channel.

And make sure you have the following in your cardclient.conf :

cccam:127.0.0.1:9000:1/0000/0000:tmp/camd.socket

//Shalafi
Thanks Shalafi. but with your line in cardclient.conf vdr says that fails to connect...

The ca.c was already correct and it isn't any file called ca0 in /dev/dvb/adapter0.
   
Reply With Quote
Where is the guide you refer to
Old
  (#4)
basicsenad
Junior Member
 
basicsenad's Avatar
 
Offline
Posts: 2

Level: 1 [♥ Bé-Yêu ♥]
Life: 0 / 0
Magic: 0 / 17
Experience: 2%

Thanks: 0
Thanked 0 Times in 0 Posts
Join Date: Feb 2009
Age: 42
Where is the guide you refer to - 27-February-2009, 07:38

Hi,

I am new to the forum and to the Linux / VDR in general.

I have a linux Debian etch working with vdr and bunch of plugins available at etobis (unfortunatelly all in German).

The VDR i have is 1.52 and i would like to install vdr-sc plugin but I have no idea how.

I have vdr-dev installed.

Please help.
Thanks,
Senad
   
Reply With Quote
Old
  (#5)
shalafi
ECS Master
 
shalafi's Avatar
 
Offline
Posts: 412

Level: 18 [♥ Bé-Yêu ♥♥ Bé-Yêu ♥]
Life: 0 / 446
Magic: 137 / 13880
Experience: 87%

Thanks: 127
Thanked 492 Times in 131 Posts
Join Date: Jul 2007
01-March-2009, 21:27

Quote:
Originally Posted by bronx1984 View Post
Thanks Shalafi. but with your line in cardclient.conf vdr says that fails to connect...

The ca.c was already correct and it isn't any file called ca0 in /dev/dvb/adapter0.
It works, I use this configuration myself ;) Are you really, really sure that CCcam is started with the ca preload? Because of you get failure to connect, that means that the preload isn't used. I use the following run.sh script to start CCcam with the preload (location of CCam.x86 and ca.c in /var/bin):

Code:
#!/bin/sh
cd /var/bin
gcc -march=pentium -mmmx -fomit-frame-pointer -fexpensive-optimizations -funroll-loops -fPIC -shared -o ca.so ca.c -ldl
LD_PRELOAD=./ca.so ; export LD_PRELOAD
while [ 1 ];
do
 ./CCcam.x86 -d > /var/log/CCcam.log
done
@basicsenad

I replied to your PM.

//Shalafi


-=[ Ubuntu Linux 9.04 | VDR 1.7.9 | HVR-4000 | eHD | Wavefield T55]=-
   
Reply With Quote
Problems with vdr-plugin-opensc-cardclient
Old
  (#6)
kaura
Junior Member
 
kaura's Avatar
 
Offline
Posts: 5

Level: 1 [♥ Bé-Yêu ♥]
Life: 0 / 8
Magic: 1 / 225
Experience: 34%

Thanks: 2
Thanked 0 Times in 0 Posts
Join Date: Feb 2009
Problems with vdr-plugin-opensc-cardclient - 05-March-2009, 21:30

Hi!
I have similar problems using vdr 1.6 and opensc (0.9.0+svn68~ppa2)
Starting the CCcam with "sudo /var/bin/run.sh &"
The web page looks good:
+----+----------+-----------------------------+-----+
|Caid| Provider | Provider Name | System|
+----+----------+-----------------------------+-----+
| b00| |Conax (Thor 1W)-(DigiAlb 16E)|conax|
+----+----------+-----------------------------+-----+
The CCcam is running on 12000:
HTML INFO LISTEN PORT : 16001
ALLOW TELNETINFO: no
WEBINFO USERNAME : linvdr
WEBINFO PASSWORD : linvdr
SHOW TIMING : yes
DEBUG : yes
DISABLE EMM : yes
EXTRA EMM LEVEL : no
MINIMUM DOWNHOPS: 1
LOG WARNINGS : /var/etc/warnings.txt
PHOENIX READER PATH : /dev/ttyS1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
F: user1 pass1
---------------

The cardclient.conf is like this
cccam:127.0.0.1:9000:1/0000/0000:/tmp/camd.socket
--------------
The CCcam log:
18:58:50.750 CCcam: ================================================== ====================
18:58:50.750 CCcam: starting CCcam 2.0.11 compiled on Dec 5 [email protected]:41:47
18:58:50.750 CCcam: ================================================== ====================
/tmp/.CCcam.nodeid open...
Closing 3
18:58:50.750 CCcam: online using nodeId ee4964d57331d8fa
/dev/dvb/adapter0/demux0 open...
Closing 7
18:58:50.754 CCcam: dvb api3 detected
18:58:50.754 CCcam: create 1 cam device(s)
/dev/dvb/adapter0/ca0 open...
hijacking ca0 open...
ca0 fd = 7hijacking ca0 ioctl,(7 : 7808 - 0xbfd72b6c): /dev/dvb/adapter0/ca1 open...
/dev/ttyS1 open...
18:58:50.863 CCcam: calculated EGT: 0 us
18:58:50.863 CCcam: conax card found
18:58:51.049 CCcam: card added to broker with caid b00
/dev/tts/1 open...
Closing -1
Closing ecm0...
/dev/tts/1 open...
Closing -1
Closing ecm0...
18:58:51.051 CCcam: added 264 keys from /var/keys/SoftCam.Key
18:58:51.053 CCcam: added 432 keys from /var/keys/AutoRoll.Key
18:58:51.054 CCcam: added 3 keys from /var/keys/constant.cw
18:58:51.056 CCcam: parsed 143 entries from /var/etc/CCcam.prio
18:58:51.059 CCcam: added 510 provider names from /var/etc/CCcam.providers
18:58:51.199 CCcam: added 4408 channel names from /var/etc/CCcam.channelinfo
18:58:51.199 CCcam: server started on port 12000
/dev/tts/1 open...
Closing -1
Closing ecm0...
------------
When I look at the CCcam I cant see the client?
(or should i not since we are using camd.socket?)
---------
Connected clients: 0
0 ACTIVE CLIENTS IN LAST 20 SECONDS
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
| Username| Host | Connected | Idle time | ECM | EMM | Version| Last used share | Ecm time |
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+
+---------+---------------+------------+------------+-----+-----+--------+----------------------+----------+


plugins:
i vdr-plugin-dummydevice
i vdr-plugin-epgsearch
i vdr-plugin-femon
i vdr-plugin-fepg
i vdr-plugin-live
i vdr-plugin-nacc
i vdr-plugin-nascan
i vdr-plugin-opensc
i vdr-plugin-opensc-cardclient
i vdr-plugin-opensc-conax
i vdr-plugin-opensc-constcw
i vdr-plugin-opensc-irdeto
i vdr-plugin-opensc-nagra
i vdr-plugin-opensc-seca
i vdr-plugin-opensc-shl
i vdr-plugin-opensc-videoguard2
i vdr-plugin-prefermenu
i vdr-plugin-radioinfo
i vdr-plugin-remote
i vdr-plugin-streamdev-server
i vdr-plugin-xineliboutput
i vdr-plugin-yaepg

Any Idea what's wrong
   
Reply With Quote
Old
  (#7)
Mattia77
Junior Member
 
Mattia77's Avatar
 
Offline
Posts: 2

Level: 1 [♥ Bé-Yêu ♥]
Life: 0 / 0
Magic: 0 / 18
Experience: 2%

Thanks: 0
Thanked 1 Time in 1 Post
Join Date: Dec 2008
Age: 40
22-June-2010, 21:52

Hi to all, i've the same error described in the first post, with cccam and newcamd too. i use vdr only as a client, i've not a server on my system.

Any idea?

thanks mattia.
   
Reply With Quote
Old
  (#8)
dabs
Retired
 
dabs's Avatar
 
Offline
Posts: 3,986

Level: 47 [♥ Bé-Yêu ♥♥ Bé-Yêu ♥♥ Bé-Yêu ♥♥ Bé-Yêu ♥♥ Bé-Yêu ♥]
Life: 116 / 1166
Magic: 1328 / 33456
Experience: 67%

Thanks: 1,670
Thanked 2,331 Times in 1,259 Posts
Join Date: May 2008
22-June-2010, 21:54

Mattia77

Before you make another post, you had better http://www.eurocardsharing.com/f181/forum-rules-5576

Please go to the intoduction section and make a post: http://www.eurocardsharing.com/introduction/f200
   
Reply With Quote
Old
  (#9)
benneton
Junior Member
 
benneton's Avatar
 
Offline
Posts: 5

Level: 1 [♥ Bé-Yêu ♥]
Life: 0 / 8
Magic: 1 / 238
Experience: 34%

Thanks: 1
Thanked 0 Times in 0 Posts
Join Date: Jul 2008
02-July-2010, 01:09

Hi there.

I have VDR 1.4.7 and vdr-sc 0.91 on Ubuntu 7.1 and SS2.
Couple years ago I had a gbox running. Obviously, now I need cccam :)

Little info:
1. CCcam (2.1.1) only works with DVB API -1 (dvb api3 detected)
2. I can't get that socket file in tmp? I need it for cardclients.conf, right?

Do I need to move to newer version of VDR and Ubuntu to get it working?

Shalafi mentioned ca.so? I can't find this lib anywhere....

Thanks a lot


UPDATE:

I got i working with vdr-1.6.0 and sc1.0.0. Thanks to creator :)

Last edited by benneton; 02-July-2010 at 13:51..
   
Reply With Quote
Reply

Bookmarks

Tags
cccam, debian, problems, skystar2, vdr


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump



ECS on RSS ECS on Twitter ECS on Facebook ECS on Youtube
Follow us on:

Powered by vBulletin
Copyright 2002 - 2010, Jelsoft Enterprises Ltd.
SEO by vBSEO ©2011, Crawlability, Inc.
Dreambox