DM500S - Problem With Channels

Hi Everyone,

I have a strange problem with channels that are Horizental . When I do search Only Vertical channels on the Hotbird are getting downloaded and working while other channels like Absat/SRG/RTL Germany that are Horizental are not showing up.

I have 3 satellite Dishes as following :

1St is located to Hotbird E13
2Nd Is Located to 2 Satellites Nilesat/Badr Sat
3Rd Is Located to Intelsat

I have 4-Port Disec Switch and Every Cable that comes out from Each LNB is going inside this Switch then 1 Cable is coming down to my DM500S.

When I use my Old Digital reciever and I do channel search I can get all channels. signal is perfect and everything is alright but when I replace it with my DM500S I dont het H. channels. I have used User Undefined Satellite setting which is the last one and Gave LNB No. for each of my 4 LNBs and All 4 I get signal from them and everything is alright but what is confusing me is Hotbird with not Loading H.(Horezintal) channels.

I went to Extra/Settings and downloaded satellites.xml.loader and then did new search on Hotbird but still same problem is there .

When I go to "Satellite configuration" and I select 2 Satellites Via Disec A/B" and I add Hotbird and Intelsat and I do new search on Hotbird I get Both V/H channels .

So can somebody advice me with what is the exactly setting that I must set inside satellite configuration section to be able to get all 4 Satellites channels instead of only 2 Satellite .

I am not using a Motor and all what I have is 3 Satellite Dishes Holding 4 LNBS and 1 Disec Switch with 4 ports that brings down signal from all 4 sats .

Waiting for everybody's advice.

hi I have the same problem you have. it seems our tuner inside the dreambox is faulty.

do let me know if you figure something out. I had to buy another box to get me going.

Regards