"No CA found by 2nd stage loader, please contact support at dream-multimedia"!

---

---

on the dm800 it's the clone protection chip usually
didn't know there was one on the dm600... maybe open the box and see under the dvb card if you see a "sim" style chip... push it and see.

otherwise, best to just wait support teams from dream multimedia to answer

p/s: is it a clone u have or an original ?

try this, pls report back if it works, did only test on dm800 boxes

[Only Registered Users Can See LinksClick Here To Register]

1) connect working box to dreamup, press connect
2) now plug in null modem in broken box, press flash and chose flash file
3) flash probably hangs
4) connect the broken box to dreamup, press connect and try flash, chose flash file, hopefully it works now

----
1) connect dead box to dreamup, press connect
2) press ok at ca error popup
3) download enforcer, search google
4) drag enfocer in front om dreamup, press enable in enforcer
5)press flash and chose flash file
6) flash probably hangs
7) connect the broken box to dreamup, press connect and try flash, chose flash file, hopefully it works now

Sorry to hijack thread, but did this work successfully on DM800? and did this enable the latest 2009 images (ie. Nabilosat 0.9) to run ok?

Kind regards, D.

never tested nabolisat 0.9 (dont know what secondloader and drivers are included in that image)

i run this on my dm800 gemeni 4.0 and secondloader #69, have some problems with my securitycard so i cant run any never secondloaders.. i try example gemeni 4.1 with included secondloader, box just hangs

and if i try gemeni 4.1 and secondloader #69 box just seems to loop.