port forward not working

vibes

Wel, after about 2 intens weeks, I neerly got everything mooving, but now I'm realy not getting past this problem:

Using a dreambox 500S, everything up to date (Pli jade, CCcam), and everything except sharing is working.

So, here's what I got:
I have the CCcam configuration right because I get incoming server connections (via C-Line), and even outgoing client connections (via F-Line), but only when accessing from an internal IP (I am testing with a second dreambox 500S).

So here is the problem:
can not access / share the box from an external IP

Done the dyndns, and it works fine (it reaches the login page on my router)

Done the port forward in the router, and testing shows that the port is "open" (I confirmd that port is not open when I remove the forward rule and vice versa).

So everything on the outside, leading to my router seems to be configured ok, and everything internaly seams to be configured ok.

But the connection ( I am convinced it is the port forwarding) is not doing what it is supposed too...

The modem router is a sitecom WL-174

The port forward section on WL-174 is in fact the "virtual server section"

It can enter the port range to be forwarded (start and end), and the local IP to forward too, but not the internal port I am forwarding into... perhaps this is an issue?

In any case, i'm so close... but so far... it's driving me nuts...

any help would be very welcome...

___________________________

DB500S - Pli Jade - CCcam - 1 local dutch

Last edited by vibes; 25-December-2008 at 03:56.

**cold007**

two things..>

1) NO NEED TO FOWARD ANYTHING INTERNALLY-->

2) ARE YOU SURE YOU are USing A TCP Protocol .> AND NOT UDP??

merry one..

cold007

Server IBM 236 Xseries cpu 4x 3ghz-
4GB ECC ddram - 2x Scsi 73gb
Raid -2x redundant power supply´s
all hardware is hot swapable!-->
ClearOs 5.1 CCcam 2.1.2
2,5mb down/600k up line
dreambox´s 500-7000-500HD-8000

i am looking for peers with only cccam -> only good locals..
send cline + card details with pm..or dont bother!!

remember u SPAM = i BAN

activley hunting nline stealers...!

vibes

Hey cold, thanks for the reply

1. internaly everything seems to be working fine

2. I don't know how to controle using TCP or UDP on the forward. I don't get an option in the "virtual server" configuration.

[IMG][Only Registered Users Can See LinksClick Here To Register][/IMG]
___________________________

DB500S - Pli Jade - CCcam - 1 local dutch

Sateurope

on button where you find ftp there must be option to set on tcp,that must do it.

Merry Xmas

vibes

wel, wouldn't you know it....

turns out my system was working and U didn't know it....

it was all due to the "loopback issue"

merry x-mass everyone

(26-December-2008 16:10)
Thanks satureurope for the tip.

just wanted to mention that on my model router (WL-174) , there is no TCP option in that menu.but thanks for trying.

trasmis

is not necesary to portforwarding your share port

**cold007**

Quote:

Originally Posted by trasmis [Only Registered Users Can See LinksClick Here To Register]

is not necesary to portforwarding your share port

well not fowarded..>

redirected.. to dream or server is a MUST for sharing!

cold007