Howto Setup SkyIT 093b Card with Ubuntu / Debian + OSCAM + SMARGO + CCCAM

Guys, this is a step by step guide how to get your SkyIT NDS3 093b card back up and running. With Ubuntu or Debian and with a Smargo Reader.

Some linux skills and CCcam experience is needed here as I am not going in detail on how to use these.

In Ubuntu / Debian :

1. Stop your CCcam server session and leave it down.

2. Make sure your CCcam is not setup running at system startup, OSCAM needs to run first.

3. Make sure your CCcam is not trying to open your Smargo usb port. Place a # in front of your CCcam line where you activate your reader.

4. Download the latest version of OSCAM. Currently I have tested with 0.99.4.528svn-i686

5. Copy and set chmod 755 rights the above oscam binary file. I placed file in /usr/local/bin/

6. In /usr/local/etc/ create 3 files as follows: oscam.conf oscam.server oscam.user with the below data within it:

for oscam.conf:

for oscam.server:

for oscam.user:

7. Now Simply shutdown your linux server. Power off motherboard so SMARGO reader has no power then turn server back on.

8. When server is up, run oscam from /usr/local/bin/ like this: ./oscamfile -b

9. Check file located in /var/log/oscam.log this should give you good news.

10. Place N line in CCcam.cfg

11. Run your CCcam and test.

followed the guide but when I start OSCAM, I get this error ...
Segmentation fault

How to fix?

Thanks.

Originally Posted by scorpions69 [Only Registered Users Can See LinksClick Here To Register] Segmentation fault

./oscam Warning: keyword 'level' in global section not recognized Warning: keyword 'nocache' in global section not recognized 2009/12/08 11:28:19 7436 s >> OSCam << cardserver started 2009/12/08 11:28:19 7436 s auth size=4736 2009/12/08 11:28:19 7436 s services reloaded: 0 services freed, 3 services loaded Warning: keyword 'cachenano' in reader section not recognized 2009/12/08 11:28:19 7436 s userdb reloaded: 0 accounts freed, 1 accounts loaded 2009/12/08 11:28:19 7436 s signal handling initialized (type=sysv) 2009/12/08 11:28:19 7436 s 2276 service-id's loaded 2009/12/08 11:28:19 7436 s 22 lengths for caid guessing loaded 2009/12/08 11:28:19 7436 s monitor: disabled 2009/12/08 11:28:19 7436 s camd 3.3x: disabled 2009/12/08 11:28:19 7436 s camd 3.5x: disabled 2009/12/08 11:28:19 7436 s cs378x: disabled 2009/12/08 11:28:19 7436 s newcamd: initialized (fd=5, port=11500, crypted) 2009/12/08 11:28:19 7436 s CAID: 093B 2009/12/08 11:28:19 7436 s provid #0: 000000 2009/12/08 11:28:19 7436 s radegast: disabled 2009/12/08 11:28:19 7436 s resolver thread started 2009/12/08 11:28:19 7436 s logger started (pid=7438) 2009/12/08 11:28:19 7436 s resolver started (pid=7439, delay=30 sec) 2009/12/08 11:28:19 7436 s reader started (pid=7440, device=/dev/ttyUSB0, detect=ring, mhz=357) 2009/12/08 11:28:19 7436 s anti cascading disabled 2009/12/08 11:28:21 7436 s client(1) connect from 127.0.0.1 (pid=7441, pipfd=11) 2009/12/08 11:28:21 7441 c01 encrypted newcamd:11500-client 127.0.0.1 granted (test, au=0) 2009/12/08 11:28:21 7441 c01 user test authenticated successfully (using client 4343) 2009/12/08 11:28:21 7441 c01 AU disabled for user test 2009/12/08 11:28:22 7440 r02 card detected 2009/12/08 11:28:27 7440 r02 Error activating card: -10 2009/12/08 11:28:28 7441 c01 test (093B&000000/0F65/81:3D62): timeout (5005 ms) 2009/12/08 11:28:31 7441 c01 Connection closed to client 2009/12/08 11:28:31 7436 s client(2) connect from 127.0.0.1 (pid=7442, pipfd=12) 2009/12/08 11:28:31 7441 c01 test disconnected from 127.0.0.1 2009/12/08 11:28:31 7442 c02 encrypted newcamd:11500-client 127.0.0.1 granted (test, au=0) 2009/12/08 11:28:31 7442 c02 user test authenticated successfully (using client 4343) 2009/12/08 11:28:31 7442 c02 AU disabled for user test 2009/12/08 11:28:33 7440 r02 Error activating card: -10 2009/12/08 11:28:39 7440 r02 ATR: 3F FD 13 25 02 50 3F FD 13 25 02 50 80 0F 33 B0 13 69 FF 4A 50 2009/12/08 11:28:40 7440 r02 /dev/ttyUSB0: custom: baud_base=24000000 baud=64516 divisor=372 -> effective baudrate 64516 (+0.00% off) 2009/12/08 11:28:40 7440 r02 no boxID available 2009/12/08 11:28:40 7440 r02 card system not supported 2009/12/08 11:28:40 7440 r02 card initializing error 2009/12/08 11:28:40 7436 s client(1) connect from 127.0.0.1 (pid=7443, pipfd=11) 2009/12/08 11:28:40 7443 c01 encrypted newcamd:11500-client 127.0.0.1 granted (test, au=0) 2009/12/08 11:28:40 7443 c01 user test authenticated successfully (using client 4343) 2009/12/08 11:28:40 7443 c01 AU disabled for user test 2009/12/08 11:28:41 7443 c01 test (093B&000000/0F65/81:B3FA): not found (1 ms) 2009/12/08 11:28:53 7443 c01 test (093B&000000/0F65/81:E5A1): not found (2 ms) 2009/12/08 11:29:04 7443 c01 test (093B&000000/0F65/81:D14D): not found (1 ms) 2009/12/08 11:29:13 7443 c01 test (093B&000000/0F65/81:6500): not found (1 ms) 2009/12/08 11:29:23 7443 c01 test (093B&000000/0F65/81:35E0): not found (1 ms)

Originally Posted by marinu [Only Registered Users Can See LinksClick Here To Register] hi, First thx a lot for this tut... Q: -does this works also for SkayIT 919 card? Q: -do i need a pci-satcard like Haupauge Nova... for AU the smartcard? regards, marinu