2nd dreambox

if i set up a 2nd dream box do i need a new dyndns host name to go in the new box or can i just split my peers clines into 2 boxes
if i need a new host name can i use the same ports ie 16000 16001

use the same dyndns, just setup each box on a different port and forward that specific port to the box you want.

EG.

box 1 - 192.168.0.1 port 12001
box 2 - 192.168.0.2 port 12002

c: your.host.com 12001 user pass <----- cline for box 1
c: your.host.com 12002 user pass <----- cline for box 2

Just make sure the ports are forwarded right in your router. :)

That`s a long way around things and means you`ll need to open a second set of ports.

Just run your second box as a client.

thanks chaps that sorts that one out

still cant get this box to work dm600pvr
i can connect to it with dcc
set a cline i n cfg file from my dm800
i can connect to the dm600 through my internet browser putting in the ip of the dm
but all i get is fta channels
in the network setup
ip dm ip 192.168.x.x
netmask 255.255.255.0
name server = ip router 192.168.x.x
gateway = ip router 192.168.x.x
if i check the dhcp box and reboot the dm i loose the settings
if i check the enable network nothing happens

web interface setup
port 80
3 choises
use http authentication
show epg in webif channel list
use zap stream
ive tried all combinations in chcking each box but still nothing
the box as open pli image with cccam210 230 setup
the router has been setup with ports 16002 and 12001
any ideas it got me stumped