HELP... new kills stb

---

---

To cragster
Try flash back none gemini image "Official 2.17 for 200s - PAL" to 200s. Then should reciver wake up agan. Lets hope that you did not messed with wrong bootloader then is things not so good.

@kapzas you help me lots.. but i took a img off a person loaded it ... and welll my problem started... here it is .. wont do seriel as blank screen on tv. wont communicate via eatherer net socket closed, wont do f##k all, alls it displys is"8888" on the led and the only thing it will do is stanby+ ok gives me up time..... its dead i think???? any advice?
cragster

(24-August-2008 03:39)
@hackamac 200s

Try to connect a composite cable instead of scart. Perhaps You'll get the menu picture then.

To HaCKaMaC that does not help. I i hope that cragster has not killed bootloader. Rigth new is problem in bootloader what does not want boot up and 8888 shows.
To cragster ok lets try some tricks what may help.
1: unplug 200s from power
2: wait 1-2minutes
3: plug 200s back to power and shortly if you see on 200s dispaly 8888 hold and press from reciver front panel down power button and then right arrow at same time.
Can you enter to bootloader menu?

Hopefully not the bootloader.
If RGB drivers are corrupted, You won't get the boot-menu on screen (no scart output). But You will on composite. So another chance not to jtag.

thanks guys,,, but no look power+down+> nothing, eather on scart or compo:( i think i killed itstill just "8888" and starts the time from power up, expensive clock:) if i plug it in at midnight
cragster

To cragster
You only chance to wake up the box is JTAG flash.
Here is howto: [Only Registered Users Can See LinksClick Here To Register]