Eurocardsharing

Go Back   Eurocardsharing > Sharing receivers > DBoxll > Chat

Chat Discussion, anybody please...gbox-dbox card not showing help--> at DBoxll forum; hello @ all--> i usally run with a db7025..my lcd display is melting..so i have to send it in.- anybody ...

Reply
 
LinkBack Thread Tools Display Modes
anybody please...gbox-dbox card not showing help-->
Old
  (#1)
cold007
Super Moderator
 
cold007's Avatar
 
Offline
Posts: 9,448

Level: 63 [♥ Bé-Yêu ♥♥ Bé-Yêu ♥♥ Bé-Yêu ♥♥ Bé-Yêu ♥♥ Bé-Yêu ♥]
Life: 314 / 1570
Magic: 3149 / 49730
Experience: 82%

Thanks: 5,191
Thanked 4,423 Times in 2,537 Posts
Join Date: Apr 2007
Location: germany -unterfranken..
anybody please...gbox-dbox card not showing help--> - 26-June-2007, 16:42

hello @ all-->

i usally run with a db7025..my lcd display is melting..so i have to send it in.-

anybody have an idea how to clean up the flash memory.before i lose my garantie!==??

my problem now is..i have a dbox2 running my gbox as a replacement --

peers are complaining that my card is not showing??

can anybody help me out ??

all seems to work fine..but i canont see my so2 premiere card as local?

i have a keywelt image on..with gbox 2.25-->

philips dbox2 with 2x intel--card i have in the upper slot??-->(although i have tried in both..)


i thank you all in advance for any help !! tipps, advice, beer..opps not beer..:)


cold
   
Reply With Quote
Old
  (#2)
cold007
Super Moderator
 
cold007's Avatar
 
Offline
Posts: 9,448

Level: 63 [♥ Bé-Yêu ♥♥ Bé-Yêu ♥♥ Bé-Yêu ♥♥ Bé-Yêu ♥♥ Bé-Yêu ♥]
Life: 314 / 1570
Magic: 3149 / 49730
Experience: 82%

Thanks: 5,191
Thanked 4,423 Times in 2,537 Posts
Join Date: Apr 2007
Location: germany -unterfranken..
29-June-2007, 18:48

hi @ all--->i found out the dbox cardslots dont support cardsharing...

thats why i odered a mutlicam!!--

and--->

i recieved the multicam--set @ 3.57mhz-->

reflashed the image-->put on my gbox....

and i still cant see my local cards....;(

do i have to change anything in the basic camd configs?? (on keyewelt image)

is 3.57mhz ok??.or i also have 3,68/6.00 mhz.. as other alternatives..?

thanks again 4 all the help...in advance!

cold007
   
Reply With Quote
Sponsored Links
Old
  (#3)
arabeman14
Member
 
arabeman14's Avatar
 
Offline
Posts: 36

Level: 4 [♥ Bé-Yêu ♥♥ Bé-Yêu ♥♥ Bé-Yêu ♥]
Life: 0 / 94
Magic: 12 / 2954
Experience: 76%

Thanks: 7
Thanked 7 Times in 4 Posts
Join Date: Jun 2007
30-June-2007, 17:43

hi,
check if you have plugged your card on the right side
   
Reply With Quote
Old
  (#4)
Tommmi
Member
 
Tommmi's Avatar
 
Offline
Posts: 59

Level: 6 [♥ Bé-Yêu ♥♥ Bé-Yêu ♥♥ Bé-Yêu ♥♥ Bé-Yêu ♥]
Life: 0 / 138
Magic: 19 / 4586
Experience: 55%

Thanks: 2
Thanked 18 Times in 13 Posts
Join Date: Nov 2006
01-July-2007, 01:15

in gbox_cfg:
V: { 00 02 }
and then your local is running in share.
   
Reply With Quote
The Following User Says Thank You to Tommmi For This Useful Post:
cold007 (01-July-2007)
Old
  (#5)
samot4
ECS Master
 
samot4's Avatar
 
Offline
Posts: 782

Level: 25 [♥ Bé-Yêu ♥♥ Bé-Yêu ♥]
Life: 0 / 605
Magic: 260 / 20027
Experience: 21%

Thanks: 1
Thanked 227 Times in 145 Posts
Join Date: Oct 2006
01-July-2007, 11:47

Dbox2 multicam V: { 00 05 }

Dbox2 multicam slot 1+cardreader com V: { 00 07 }


RaspberryPi Wheezy Oscam
VU+DUO Blackhole mgcamd
Vusolo2 Blackhole Oscam
   
Reply With Quote
The Following User Says Thank You to samot4 For This Useful Post:
cold007 (01-July-2007)
still wont work->
Old
  (#6)
cold007
Super Moderator
 
cold007's Avatar
 
Offline
Posts: 9,448

Level: 63 [♥ Bé-Yêu ♥♥ Bé-Yêu ♥♥ Bé-Yêu ♥♥ Bé-Yêu ♥♥ Bé-Yêu ♥]
Life: 314 / 1570
Magic: 3149 / 49730
Experience: 82%

Thanks: 5,191
Thanked 4,423 Times in 2,537 Posts
Join Date: Apr 2007
Location: germany -unterfranken..
still wont work-> - 01-July-2007, 12:21

Hi @ all--->
ive tried again the couple of tips --u guys gave me--but

-->it still wont work->

here my con_fig-->
maybe somebody has an idea??

thanks again in advance...

cold007

ps-->i have clock now @ 6mhz

Quote:
#gbox config file
# Trace/Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (don´t use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 01 01 } 192.168.1.24 8024
# Task type
# 00 ** normal mode gbox mode (no season, use Multicam instead)
# 01 ** Season Emulation in a Irdeto allcam chid 0602 nonZ
# 10 ** Season Emulation in a Irdeto allcam chid 1702 nonZ
# 11 ** Season Emulation in a Irdeto allcam chid 1702 Z
# 12 ** Season Emulation in a Irdeto allcam chid 1722 Z
# 13 ** Season Emulation in a Irdeto allcam chid 1762 Z
# ** *1 Com port to use for season emulatiom (1 or 2)
# ** 0* Use CTS f?r RST detection
# ** 1* Use DCD f?r RST detection
# ** ** 9600 = Baudrate to be used (working only on dbox2)
W: { 00 00 } 9600
#gbox working mode
# 00 pure Emu
# 01 pure SoftCam (when card inside), Emu (when no card inside)
# 02 pure Net Client
# 03 Mixed mode !!!!! always use this !!!!!
G: { 03 }
# Display ECM messages on Konsole
# 00 don´t show any ECM´s
# 01 show only valid ECM´s
# 02 show valid and bad ECM´s with complete data display
C: { 01 }
# Display EMM messages on Konsole
# 00 don´t show any EMM´s
# 01 show only valid EMM´s
# 02 show valid and bad EMM´s with complete data display
# 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
M: { 01 }
# AutoUpdate
# 00 is ignored (default)
# 01 enable AU
# 02 Auto AU !!!!! always use this !!!!!
A: { 02 }
# Key update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 01 }
# Hash pids
# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
# 01 hash only pids with implemented algos and available keys !!!!! always use this
H: { 01 }
# Key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }
# On Screen Display for the Multysystemcam on com1/com2
# 00 No OSD (default)
# 01 display Smartcard messages in Neutrino
# 02 display Smartcard messages in Neutrino new nhttpd format
# 03 display Smartcard messages in Enigma
O: { 00 } 192.168.1.24
# Logger and NET-mode UDP port Init
# 00 do not init UDP port
# 01 Init UDP port for IP, port, UDP
L: { 00 } 192.168.1.24 8017
# *x ** ; x = device nummber to be used (0= default)
# D* ** ; force use of /proc/bus/gtx for cw write operations
(in the dbox2 the gbox writes directly the CW´s, 00 is the
recommended mode ! No drivers are required) use D* ** ONLY if
you have Problems. 0* ** should be prefered !!!
# F* ** ; write CW´s in both devices (used for PVR in STB04xxx devices)
# ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
# ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
# ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
# ** *z ; z=0001b (0x*1) use com1 as Multicam
# ** *z ; z=0010b (0x*2) use com2 as Multicam
# ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
# ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
# ** *z ; z=0100b (0x*4) invert CTS detection on com1
# ** *z ; z=1000b (0x*8) invert CTS detection on com2
# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
V: { 00 05 }
# ================================================== ===========================
# extra options to override default seting in case you expirience Problems,
# normaly these setings are not required.
#
# cpu, api, cw write method
#
# 00 auto
# 01 80X86
# 02 MPC823
# 03 IBM STB04xxx
# 00 auto
# 01 ibm
# 02 api2
# 03 api3
# 00 cw write style = use internal routine (only dbox2)
# 01 cw write style = CA_SET_DESCR type1 (dbox2, vdr)
# 02 cw write style = CA_SET_DESCR type2
# 03 cw write style = CA_SET_DESCR type3
# 04 cw write style = 16 byte /proc/bus/gtx
# 05 cw write style = 4096 byte /proc/bus/gtx, cw offset=0x04D0
# xx write cw in 1st device with index=xx
# yy write cw in 2nd device with index=yy
# 01 means with .index=0 (default)
# 02 means with .index=1
# 03 means with .index=0 and .index=1
# .. any bitwise combination ...
# FF means with all 8 indexes (0-7)
J: { 01 00 00 01 01 }
# Files, folders, devices
# folder/device comment
#
#F: { 01 } /var/tmp/pmt.tmp // pmt file
#F: { 02 } /var/tmp/emm.info // key update log file
#F: { 03 } /var/tmp/ecm.info // ecm info file
#F: { 04 } /var/tmp/atack.txt // atack info file
#F: { 11 } /var/keys // folder for config files
#F: { 12 } /var/tmp // folder for temporary file
#F: { 13 } /var/tmp // folder for keyfiles
#F: { 21 } /dev/dvb/adapter0/ca0 // ca device
#F: { 22 } /dev/dvb/adapter0/dvr0 // dvr device
#F: { 23 } /dev/dvb/adapter0/demux0 // demux device
#F: { 31 } /dev/dvb/adapter0/ca1 // second ca device to write cw's (recording)
#F: { 41 } /dev/sci0 // STB04xxx slot1
#F: { 42 } /dev/sci1 // STB04xxx slot1
#F: { 43 } /dev/tts/0 // rs232 com1
#F: { 44 } /dev/tts/1 // rs232 com2
# For overclocking freaks, Clocking internal STB04xxx slots with:
# 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz
# Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz
# The Dream has not a clean clock signal, some cards that are sensitive will
# refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there.
# On other STB04xxx recievers the same cards work with 6.30MHz
#
#F: { 51 } 02 // irdeto
#F: { 52 } 03 // seca
#F: { 53 } 03 // viaccess
#F: { 54 } 03 // nagra
#F: { 55 } 03 // crypto
#F: { 57 } 03 // conax
F: { 58 } 02 // nds
here also from gboxsharecontrol--->
Quote:
Card info Slot 11

ATR:3B9F3B9F
Irdeto

HexSerial 000000
Provider00 00 00 00
Provider10 00 00 00
CaID1 0000
CaID2 0000
CaID3 0000
CaID4 E43B
nonz Camkey NOT accepted
Baudrate = 9600 Baud
---------------------------------
it seems @ least something is working??-->
but still shows no card--``??--->
cold007

(01-July-2007 17:37)

thanks @ all---by a little luck & alot of reading!

i have got it going!!--->

it was like giving birth to a large animal-->LOL

---> now all ok.!!


@ mods´--> this thread can be closed-->:)

asta
cold007

Last edited by cold007; 01-July-2007 at 18:37.. Reason: Automerged Doublepost
   
Reply With Quote
Old
  (#7)
Eggs_n_Beans
No longer active here
 
Eggs_n_Beans's Avatar
 
Offline
Posts: 677

Level: 23 [♥ Bé-Yêu ♥]
Life: 0 / 566
Magic: 225 / 18402
Experience: 67%

Thanks: 248
Thanked 1,628 Times in 377 Posts
Join Date: Jan 2007
Location: SW France
Age: 51
03-July-2007, 17:02

A simple answer of how you got it working may help others in the future though!!!!
Was it anything to do with F: { 58 } 02 // nds ?
   
Reply With Quote
yo @ all...
Old
  (#8)
cold007
Super Moderator
 
cold007's Avatar
 
Offline
Posts: 9,448

Level: 63 [♥ Bé-Yêu ♥♥ Bé-Yêu ♥♥ Bé-Yêu ♥♥ Bé-Yêu ♥♥ Bé-Yêu ♥]
Life: 314 / 1570
Magic: 3149 / 49730
Experience: 82%

Thanks: 5,191
Thanked 4,423 Times in 2,537 Posts
Join Date: Apr 2007
Location: germany -unterfranken..
yo @ all... - 04-July-2007, 11:44

yo @all...

Quote:
Originally Posted by Eggs_n_Beans View Post
A simple answer of how you got it working may help others in the future though!!!!
Was it anything to do with F: { 58 } 02 // nds ?
haha @ eggs...u want me to embarass myself??:)

ok--> no it had nothing to do with any f-line-->

basically...it was a combination of a couple of things..

1 -- i am heavily medicated due to health problems...(morphine 75mgµ hourly)

2-- and i was to greedy!!--> i usually have a DM7025 as server, now its in the shop-->

being i have my dbox running as a server i thought to myself..i might as well let the mgcam run with the gbox..then i also have multivision/tps freeze-free

..but what i forgot was, is to adjust my mgcam_confg!! that was causing a conflict.

then to top things off--->@ the same time i was doing my config´s ,#

i was asked to help a forum friend here ..to test/configure another guys gbox..

i just put the dline in my cwshare..as he gave it to me..without noticing a the imfamous extra space!!--->

this was the same time as i just had adjusted the mgcam...then--all hell broke loose as u can imagine..lol

well i learned alot --->from my own mistake..and had a great laugh @ myself..:O)

moral of the story---> theres always light @ the end of the tunnel.
(hehe or is that a train?)

cold007
   
Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump



ECS on RSS ECS on Twitter ECS on Facebook ECS on Youtube
Follow us on:

Powered by vBulletin
Copyright 2002 - 2010, Jelsoft Enterprises Ltd.
SEO by vBSEO ©2011, Crawlability, Inc.
Dreambox